 |
 |
 |
|
|
|
[Sponsors] | ||||
January 20, 2007, 10:22
|
editing STL file in ICEM CFD
|
#1 |
|
Guest
Posts: n/a
|
Hi I am using ANSYS 10.0 with ICEM CFD. I created the STL file of human vertebra and i have imported into ICEM CFD. Is there a way to modify the STL geometry ?
for example: how would make a hole to the in the geometry. |
|
|
||
|
January 22, 2007, 08:34
|
Re: editing STL file in ICEM CFD
|
#2 |
|
Guest
Posts: n/a
|
Under the Geometry Panel - Create/Modify Surfaces - you should see some buttons for Creating/Modifying faceted surfaces. (Or it could have it's own top-level icon. You can add/remove triangles. Move triangles from one surface to another, etc.
|
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [swak4Foam] swak4foam building problem | GGerber | OpenFOAM Community Contributions | 54 | April 24, 2015 16:02 |
| pisoFoam compiling error with OF 1.7.1 on MAC OSX | Greg Givogue | OpenFOAM Programming & Development | 3 | March 4, 2011 17:18 |
| Problem installing on Ubuntu 9.10 -> 'Cannot open : No such file or directory' | mfiandor | OpenFOAM Installation | 2 | January 25, 2010 09:50 |
| OpenFOAM on MinGW crosscompiler hosted on Linux | allenzhao | OpenFOAM Installation | 127 | January 30, 2009 19:08 |
| How is ICEM CFD mesh file format? | Seth | CFX | 4 | March 2, 2008 17:22 |
Linear Mode
