Lagrangian Particle Tracking

Martin_Sz · September 9, 2014, 01:53

Hello Everyone,
Can anyone advice me about lagrangian particle tracking tutorial. I need this for One Way FSI simulation. I want to determine in CFX pressure distribution on steel interface surface after hitting steel particle from inlet which is on air domain.
Best regards from Poland

Parisa · September 9, 2014, 04:50

Hi,

If you simply want to know how to set up particle tracking in CFX, you can find some information about that in this tutorial from ANSYS. In this tutorial the particle tracking is meant to calculate the erosion rate on surfaces, but in general the particle injection method should be helpful to you too. Hope it helps!

http://www.arc.vt.edu/ansys_help/cfx_tutr/i1318137.html

//Parisa

September 9, 2014, 04:50	Tutorial	#2
Parisa New Member Join Date: Aug 2014 Posts: 13 Rep Power: 11	Hi, If you simply want to know how to set up particle tracking in CFX, you can find some information about that in this tutorial from ANSYS. In this tutorial the particle tracking is meant to calculate the erosion rate on surfaces, but in general the particle injection method should be helpful to you too. Hope it helps! http://www.arc.vt.edu/ansys_help/cfx_tutr/i1318137.html //Parisa

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[swak4Foam] Validation of swak4Foam for lagrangian particle tracking	nero235	OpenFOAM Community Contributions	13	March 28, 2017 05:45
Lagrangian Particle Tracking in Eulerian-Eulerian Multiphase Flow	DarrenC	CFX	5	April 7, 2016 14:50
Lagrangian particle tracking and cell size	Julian K.	CFX	4	May 27, 2014 11:35
Ubuntu 12.10 + openfoam2.2.0 ==> paraview error message	peteryuan	OpenFOAM Installation	6	August 18, 2013 18:00
injection problem	Mark New	FLUENT	0	August 4, 2013 01:30