CFD Matlab vs Fluent

April 17, 2007, 07:47

Dear Forum

We are facing a real complicated CFD problem. We need to simulate Aerosoles ( water droplets ) injected by nozzels into a high velocity airstrem ( not symetrical 60 m/s). We need to see were the droplets are taken too ( approx. distance is 1 - 2 m )

Now my question can such a task be solved by both fluent or and Matlab CFD. Since we learnt that the net needs to be more than 1.5 mio. resolution.

thanks

thomas stauffiger

April 19, 2007, 12:31

you might want to consider STAR-CD since this sounds very similar to fuel atomisation and evaporation in engines (both inlet manifolds and in-cylinder) which STAR-CD has excelled at for many years.

April 17, 2007, 07:47	CFD Matlab vs Fluent	#1
Thomas Stauffiger Guest Posts: n/a	Dear Forum We are facing a real complicated CFD problem. We need to simulate Aerosoles ( water droplets ) injected by nozzels into a high velocity airstrem ( not symetrical 60 m/s). We need to see were the droplets are taken too ( approx. distance is 1 - 2 m ) Now my question can such a task be solved by both fluent or and Matlab CFD. Since we learnt that the net needs to be more than 1.5 mio. resolution. thanks thomas stauffiger

April 19, 2007, 12:31	Re: CFD Matlab vs Fluent -> try STAR-CD	#2
ping Guest Posts: n/a	you might want to consider STAR-CD since this sounds very similar to fuel atomisation and evaporation in engines (both inlet manifolds and in-cylinder) which STAR-CD has excelled at for many years.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFD Design...The CFD Future	John C. Chien	Main CFD Forum	20	November 19, 2015 23:40
sketchup file for CFD with fluent	xvisiecle	FLUENT	0	May 19, 2011 13:24
ICEM CFD for FLUENT???	ahilana	FLUENT	2	January 20, 2011 04:18
ICEM CFD - Fluent interface- reg...	saisanthoshm88	FLUENT	0	November 27, 2010 11:30
prob while exporting icem cfd hexa mesh to fluent	mani	CFX	4	March 7, 2007 03:41