CFD Online Logo CFD Online URL
Home > Forums > Main CFD Forum

flat palte boundzry layer

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 29, 2007, 10:04
Default flat palte boundzry layer
Posts: n/a
Sponsored Links
helo sir, im solving Flat Plate boundary layer the conditions i applied are entrance : u=1;v=0;dp/dx=0; exit : du/dx=0;dv/dx=0;p=0; top : u=1, v=0;p=0; bottom : u=v=0;dp/dy=0;

size of the domain 20:4;

the problem im facing is i have got velocity greater than one. this is due to maintain the conservation of mass. ie at the entrance u=1 it has some mass in this control volume. in the downstream due to boundary layer there is a reduciton in velocity at the bottom, but inorder to maintain the mass conservation it increases the velocity greater than one. so plz let me the correct boundary condition. thanks in advance
  Reply With Quote
Sponsored Links


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
SnappyHexMesh - no layer added bejbro OpenFOAM Mesh Utilities 4 October 16, 2014 19:24
Boundary layer in a pipe Clementhuon OpenFOAM Native Meshers: snappyHexMesh and Others 6 March 12, 2012 13:41
Boundary layer generation problems ivan_cozza OpenFOAM Native Meshers: snappyHexMesh and Others 0 October 6, 2010 13:47
errors Fahad Main CFD Forum 0 March 23, 2004 14:20
flat plate boundary layer data Ekachai Juntasaro Main CFD Forum 3 March 14, 2001 00:18

Sponsored Links

All times are GMT -4. The time now is 12:28.