CFD Online Logo CFD Online URL
Home > Forums > General Forums > Main CFD Forum

Global residuals in transient case

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   August 6, 2007, 07:12
Default Global residuals in transient case
Posts: n/a
Once again... Im wondering how to judge variations in the global residuals in a transient case. Can anyone please tell me how to deal with the fact that after a few hundred iterations the global mass residual does a few "peaks" to a value between 0.1 and 1 and then goes back under the global residual tolerance of 0.001 for the rest of the calculation. Time step and courant nr. should be OK in this case. Thanks mx
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to write k and epsilon before the abnormal end xiuying OpenFOAM Running, Solving & CFD 8 August 27, 2013 15:33
calculation diverge after continue to run zhajingjing OpenFOAM 0 April 28, 2010 04:35
Convergence moving mesh lr103476 OpenFOAM Running, Solving & CFD 30 November 19, 2007 14:09
Oscillating Residuals in Finer Mesh Case Jake FLUENT 3 June 16, 2005 09:34
Fluidisation transient case Vikas Kumar Main CFD Forum 0 April 24, 2003 03:29

All times are GMT -4. The time now is 23:53.