CFD Online Discussion Forums

CFD Online Discussion Forums (
-   Main CFD Forum (
-   -   Multiple Inlet Problems (

Neetin Lad September 20, 2007 13:40

Multiple Inlet Problems
I have a mesh of a simple mixing pipe with a main flow being mixed with a smaller pipe at a 90degree elbow. i have meshed and set boundary conditions 2 inlets and one outlet in gambit. exporting the mesh was sucessful, however when displaying the grid in fluent 5, there are no inlet boundary conditions. is there any reason for this?

much apprietiated.

All times are GMT -4. The time now is 19:23.