CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Microparticle in fluid flow modeling

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 5, 2007, 18:46
Default Microparticle in fluid flow modeling
  #1
Rajat
Guest
 
Posts: n/a
I'm trying to model a microfluidic device that has miroparticles flowing in it with water. I'm using CFD-ACE GUI but I don't know which module to use for this. Any help would be greatly appreciated.
  Reply With Quote

Old   November 8, 2007, 05:39
Default Re: Microparticle in fluid flow modeling
  #2
Jim
Guest
 
Posts: n/a
It depends on what you are trying to do. When I did something similar (low RE mixing in a MEMS device), I used the Chemistry module to define the particle distribution as a simple scalar. This made it easier for me to do all the rheology stuff I was interested in (variations in viscosity, density, diffusivity etc). I could of used the User Scalar module, only this wasn't compatible with the free surface flow module I needed for my work (you don't mention an air/water interface so you may not have this problem). FYI, the user scalar module allows for anisotropic diffusion whereas the chemistry module doesn't. If you want to go for full-on particle tracking, then you need the Spray module.
  Reply With Quote

Old   November 12, 2007, 13:28
Default Re: Microparticle in fluid flow modeling
  #3
Rajat
Guest
 
Posts: n/a
I'm trying to use the Spray module but I'm not sure how to use it. I just have particles in water flowing though a channel and I want to see their flow pattern.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Constant flow rate through a small area inside the fluid domain. robingilbert OpenFOAM 7 October 4, 2010 17:19
Expert parameter to stop the fluid flow simulation KK CFX 1 February 25, 2008 17:29
Modeling of free surface in CFD ? Kim TaeMin Main CFD Forum 18 July 16, 2001 12:38
Flow visualization vs. Calculated flow patterns Francisco Saldarriaga Main CFD Forum 1 August 3, 1999 00:18


All times are GMT -4. The time now is 02:51.