CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

About flowfield-dependent variation(FDV) method?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 27, 2007, 22:21
Default About flowfield-dependent variation(FDV) method?
  #1
Jinwon
Guest
 
Posts: n/a
Recently, I have put some questions for a unified compressible/incompressible solution method. Through literature survey, I today found the reference containing the flowfield-dependent variation(FDV) method. According to that book, it is an alternative method to avoid pressure-correction in incompressible computation. In addition, it performs well in computing the fluid flow having both compressible and incompressible properties.

I wonder if anyone confirms that the FDV method is the method I desire to find to simulate such complex flows.

If so, is there any good reference to study this subject?
  Reply With Quote

Old   December 4, 2007, 22:13
Default Re: About flowfield-dependent variation(FDV) metho
  #2
Abdulhafid M. Elfaghi
Guest
 
Posts: n/a
Dear Jinwon

I think FDV method is an extend to Beam-Warming implicit method, the differences are: 1)the calculation of the implicit parameters using flowfield variables(u,v,rho,....) at every node and each time step.2) the accuracy of time is third order. The only references I found are those papers by prof. Chung group, the university of Alabama and M.Sc thesis by B. R.Girgis, Cairo University

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Shell Patch Dependent method query siw ANSYS Meshing & Geometry 14 August 28, 2013 23:28
[Gmsh] discretizer - gmshToFoam Andyjoe OpenFOAM Meshing & Mesh Conversion 13 March 14, 2012 05:35
Code for most powerfull FDV Method D.S.Nasan Main CFD Forum 6 September 4, 2008 03:08
Help about the preconditioner in gmres method Dan Gao Main CFD Forum 3 July 5, 2008 02:18
hess-smith method and fvm method yangqing FLUENT 0 March 20, 2002 20:25


All times are GMT -4. The time now is 17:32.