CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Sofware for spray simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 9, 2007, 07:55
Default Sofware for spray simulation
  #1
Joe
Guest
 
Posts: n/a
Hallo all experts,

I'm facing a project about simulating spray and consequent collision on solid substrate. I only have experience with the microfluid solver from CoventorWare, and heard about that ANSYS also offer certain package for CFD. Could anyone of you give some hints on this simulation, so that I could correctly start with? Except Navier-Stokes equations, is there any other sophisticated theory on this issue? Is there any open project on this topic?

Thanks a lot in advance,

Joe
  Reply With Quote

Old   December 9, 2007, 14:37
Default Re: Sofware for spray simulation
  #2
otd
Guest
 
Posts: n/a
The KIVA family of codes developed at the Los Alamos National Lab - and used at several universities - has a spray model included. This of course is used for fuel injection simulation within the IC engine simulations that KIVA was developed for.
  Reply With Quote

Old   December 9, 2007, 17:26
Default Re: Sofware for spray simulation
  #3
shuo
Guest
 
Posts: n/a
Hi Joe,

It sounds like you are modelling a coating spray technology. I am also doing some modelling in that field for my PhD.

SHuo.
  Reply With Quote

Old   December 10, 2007, 17:07
Default Re: Sofware for spray simulation
  #4
James
Guest
 
Posts: n/a
Hi

If you are looking at spray simulation in commercial codes then you should look at all your options, I have used STAR-CD a lot and it is used very widely for engine spray apps and I believe it is the only of the commercial codes that allows volume fractions up to 40%
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why my simulation not agree with the wind tunnel experiment zhaowei CFX 4 July 11, 2015 04:36
Solar Radiation in OpenFOAM plainstyle OpenFOAM Running, Solving & CFD 15 July 8, 2014 05:43
Axial fan simulation in UG/NX 7.5 fan123 Main CFD Forum 2 April 23, 2011 09:22
Simulation of a complex wing in solidworks flow simulation niels1900 FloEFD, FloWorks & FloTHERM 6 April 20, 2011 11:44
strange simulation error Ralf Schmidt FLUENT 2 May 4, 2007 14:02


All times are GMT -4. The time now is 17:54.