 |
 |
 |
|
|
|
[Sponsors] | ||||
December 13, 2007, 14:09
|
validity of SST k-w model
|
#1 |
|
Guest
Posts: n/a
|
Is the SST k-w model valid only for incompressible flows? Thank you.
|
|
|
||
|
December 14, 2007, 10:25
|
Re: validity of SST k-w model
|
#2 |
|
Guest
Posts: n/a
|
No.
|
|
|
|
||
|
December 14, 2007, 13:42
|
Re: validity of SST k-w model
|
#3 |
|
Guest
Posts: n/a
|
There are compressible versions of k-w around. You'll have to search for them, as I don't have any references off the top of my head.
|
|
|
|
||
|
December 20, 2007, 17:39
|
Re: validity of SST k-w model
|
#4 |
|
Guest
Posts: n/a
|
Topic is covered in:
Turbulence Model Validation for Hypersonic Flows J. Brown, NASA Ames Research Center, Moffett Field, CA AIAA-2002-3308 8th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, St. Louis, Missouri, June 24-26, 2002 You need not couple the model with the mean flow eqs which can speed up the solver by quite a bit. SST model tends to give slightly high heat transfer (10 to 15%) but is quite robust. Remember to validate your implementation against expt. and also Van Driest II. |
|
|
|
||
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Use of k-epsilon and k-omega Models | Jade M | Main CFD Forum | 40 | January 27, 2023 08:18 |
| SST turbulence model | PCFD | CFX | 56 | June 20, 2017 16:45 |
| Near wall treatment in k-omega SST | Arnoldinho | OpenFOAM Running, Solving & CFD | 38 | March 8, 2017 14:48 |
| convergence problem of the SST and RNG k-e model for mixing tank | ziyan7 | FLUENT | 0 | March 8, 2011 07:13 |
| CFX's DES turb model hardcoded with kw SST??? | Phil | CFX | 2 | January 7, 2008 21:01 |
Linear Mode
