CFD Online Logo CFD Online URL
Home > Forums > General Forums > Main CFD Forum

comsol evaporation boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 1, 2008, 12:43
Default comsol evaporation boundary condition
Posts: n/a
I want to set an interior boundary condition as 'evaporation' (Crank's terminology) meaning: j= -D dc/dx = k(c1 - B c2) where k is a surface exchange coefficient, c1 and c2 are values just before and after boundary, and B takes care of cases where concentrations in equilibrium may differ (consider a chunk of salt in equilibrium with a saturated salt solution - the concentration in solution is much less than in solid, but j=0). I don't see any way to do it ; have tried using 'up' and 'down' functions to access the values of c just before and after a boundary but I cant figure out how to display these values to check them (and in the meantime they always seem to come out 0).
  Reply With Quote

Old   January 1, 2008, 12:52
Default Re: comsol evaporation boundary condition
Posts: n/a
this is in comsol 3.2 by the way
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Domain Imbalance HMR CFX 5 October 10, 2016 05:57
Setting outlet Pressure boundary condition using CAFFA code Mukund Pondkule Main CFD Forum 0 March 16, 2011 04:23
asking for Boundary condition in FLUENT Destry FLUENT 0 July 27, 2010 00:55
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
How to set boundary condition in Fluent for the fo Peiyong FLUENT 1 November 10, 2006 12:44

All times are GMT -4. The time now is 15:13.