- **Main CFD Forum**
(*https://www.cfd-online.com/Forums/main/*)

- - **forces and moments
**
(*https://www.cfd-online.com/Forums/main/14700-forces-moments.html*)

forces and moments
Hello,
From a cfd solution i get forces F[3] and moments M[3] in a coordinate system. I then rotate them in a new coordinate system whose x axis is aligned with the force vector. I then expect M[0] (along x axis) to be close to 0 (ideally should be 0); but it's NOT. U get a moment around 1% of the norm of M. Is it only due to numerical errors? I have looked at results on different geometries and different solvers, i get this error everywhere. Regards, Nico |

All times are GMT -4. The time now is 21:59. |