CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

transfer mesh from ansys workbench to maxwell

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 18, 2015, 07:45
Default transfer mesh from ansys workbench to maxwell
  #1
New Member
 
david
Join Date: Feb 2015
Posts: 1
Rep Power: 0
davidsve is on a distinguished road
hi all

i am doing analysis of static magnets using ansys 14.5 and Maxwell 16 using ansys workbench. i want to be able to make the mesh using the ansys work bench mesher instead of using the adaptive mesh of mesh operations that Maxwell provides. it will help alot if someone can explain to me how to import mesh from ansys mesher to Maxwell

thank you all!
davidsve is offline   Reply With Quote

Old   January 31, 2018, 04:20
Default
  #2
New Member
 
Join Date: Jan 2018
Posts: 1
Rep Power: 0
thomas_cold is on a distinguished road
I'd be interested in this too,
because I'm meshing in Maxwell right now, but it only uses 1 core, even though I've got more than one body.

I found many articles about parallel meshing in Ansys but not quite anything about parallel meshing in Maxwell.
thomas_cold is offline   Reply With Quote

Old   June 11, 2018, 04:42
Default core selection
  #3
New Member
 
kamran
Join Date: Jun 2018
Posts: 1
Rep Power: 0
kamiphy is on a distinguished road
Quote:
Originally Posted by thomas_cold View Post
I'd be interested in this too,
because I'm meshing in Maxwell right now, but it only uses 1 core, even though I've got more than one body.

I found many articles about parallel meshing in Ansys but not quite anything about parallel meshing in Maxwell.
in maxwell go to tools bar then options, in option tab you will find all available design geometries, you have to select your desired 1D, 2D, 3D, and click. after click you will see the core selection procedure. good luck
kamiphy is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] No layers in a small gap bobburnquist OpenFOAM Meshing & Mesh Conversion 6 August 26, 2015 10:38
[ANSYS Meshing] Output Ansys WorkBench mesh information KiiiKi ANSYS Meshing & Geometry 0 September 17, 2014 11:42
[ANSYS Meshing] ANSYS mesh - I was surprised... assafwei ANSYS Meshing & Geometry 0 September 4, 2014 13:17
importing mesh from Gambit and other software to ansys workbench mortazavi CFX 12 May 30, 2012 08:38
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 06:17.