CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Two-phase flow

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 12, 2015, 05:34
Post Two-phase flow
  #1
New Member
 
chachin
Join Date: Mar 2015
Posts: 3
Rep Power: 11
chachin is on a distinguished road
I am trying to create subcooled flow boiling through a duct under the influence of gravity in transient condition , so as to determine the impact of temperature gradient on the walls. the problem is that i couldn't get a proper temperature rise in fluid. fluid flows at a constant temperature till close to the outlet and then there is a sudden change in temperature ( ie the phase change the is supposed to occur gradually is taking place suddenly at the exit) can anyone help me ??

Am using Eulerian model, RPI boiling
chachin is offline   Reply With Quote

Old   March 12, 2015, 11:13
Default
  #2
Senior Member
 
Matt
Join Date: Aug 2014
Posts: 947
Rep Power: 17
fluid23 is on a distinguished road
I am not sure how helpful this will be for you, but I had a problem where I was getting a sudden change in temperature (and density) at a boundary condition in a RANS analysis. We determined that it was most likely an improperly defined operating condition that wasn't realistic. This caused some sort of conflict between the turbulence model near wall approximations and the boundary condition. Once I fixed my operating condition I didn't have any problems.
fluid23 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
gas-liquid 2 phase flow in microchannels using VoF LyngHoo FLUENT 1 November 13, 2012 20:01
Two Phase Darcy flow with gravity -> problem Cyp OpenFOAM Programming & Development 0 November 17, 2010 08:58
two phase flow + ice phase and breaking soeren87 OpenFOAM Running, Solving & CFD 0 September 19, 2010 11:20
Validation for laminar Disperse phase flow shashwat Main CFD Forum 0 April 4, 2008 03:20
how 2 freeze 1 phase flow field & start lagrangian KK CFX 5 February 14, 2008 17:48


All times are GMT -4. The time now is 06:21.