CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

NEED HELP on IC engine simulation with AVL FIRE!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 13, 2008, 02:04
Default NEED HELP on IC engine simulation with AVL FIRE!
  #1
Mohsen khalafi
Guest
 
Posts: n/a
HI every body

I'm trying to simulate an open cycle of an CI engine with the AVL Fire software . I have done my mesh and now I'm trying to do the calculations and my solution diverges . i wanna know if any of you guys have done the same thing or similar to that Cuz I wanna know how to do the initialization to make the solution more stable (i mean the initial turbulent kinetic energy and dissipation rate ) and some other setting that might affect the convergence .

Thanks a lot
  Reply With Quote

Old   August 13, 2008, 08:54
Default Re: NEED HELP on IC engine simulation with AVL FIR
  #2
doki
Guest
 
Posts: n/a
hi well I must know more on your problem, but there seems you have used the default values for the turbulent kinetic energy and dissipation rate. in case of ICE, these values should be accurately determined. As the in cylinder Fluid mechanical Phenomena is quite complex, the initial guess becomes more critical. In order to get a more stable solution, one of important things is to set proper initial conditions, far different from the software default values, i.e. in ICE cases, usually the turbulent kinetic energy is of order 10, and the default value is just 0.001!

  Reply With Quote

Old   February 6, 2014, 08:47
Default need to help
  #3
New Member
 
saeed divrakhsh
Join Date: Jul 2010
Posts: 8
Rep Power: 15
valikiut is on a distinguished road
Hi everyone,
I am new user of AVL Fire and I want to simulate simple diesel engine combustion. In solver steering file (SSF), I use eddy breakup combustion model for combustion and diesel model for auto ignition model and their default constant for them, but I have some problems. The start of combustion is late and the results are unacceptable. How can I modify it? Should I change auto ignition model or its constants? What is the best model for combustion and auto ignition model for diesel? How can I change injection pressure? There is nothing in SSF file for injection pressure. Would I have your SSF file for diesel combustion?
Please help me.
Thanks.
valikiut is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fire simulation mesumon203 FLUENT 7 July 4, 2012 07:40
GUI crash and simulation engine still running RPJones FLOW-3D 2 November 9, 2010 09:18
fire simulation Frank Phoenics 3 February 1, 2006 19:52
Fire Simulation Loh Main CFD Forum 6 December 4, 1998 07:07
Question concerning about the flow simulation of a fan in an engine room. ghlee Main CFD Forum 3 October 21, 1998 08:05


All times are GMT -4. The time now is 02:19.