CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Test Cases to validate 2D Euler Schemes

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 25, 1999, 09:00
Default Test Cases to validate 2D Euler Schemes
  #1
Nitin Bhagat
Guest
 
Posts: n/a
I have written 8 Schemes to solve 2D Euler Problems, and am planning to add some more. Right now I am looking for test cases to check how my code responses to them. One I have tested is BUMP PROBLEM. Are there any, what are they????
  Reply With Quote

Old   November 25, 1999, 09:50
Default Re: Test Cases to validate 2D Euler Schemes
  #2
Praveen Chandrashekar
Guest
 
Posts: n/a
These are standard cases.

1 NACA0012

Mach AOA

0.63 2.0

0.80 1.25

0.85 1.0

1.20 0.0

2 Semicylinder, mach=3.0

3 Cylinder, low mach number, something like 0.1

4 Flow over a ramp, which will have an oblique shock, expansion fan, and shock reflection.
  Reply With Quote

Old   November 30, 1999, 19:39
Default Re: Test Cases to validate 2D Euler Schemes
  #3
clifford bradford
Guest
 
Posts: n/a
hi nitin, i worked with some fellows who were developing a euler code. to start off they did a lot of problems that had analytical solutions. some of them might seem exceedingly simple but since you know the answer you can make perfect compariosn to results. while the NACA 0012 is a well tested airfoil (as are the ONERA M6 and a certain RAE foil) comparing euler results to experimental data doesn't always make sense since the experimental results are viscous (real) while the euler results are inviscid (idealised). good test cases include 1-d shock tube (very basic but good), compresssion ramps , expansion corners (typical table solution), subsonic flow over a cylinder (you should of course have perfect pressure recovery and a symmetric flow field). there are a few other test problems you might want to work on. things you should look for include: constant (zero) entropy (or vorticity) for shock free flows, constant stagnation temperatures for all flows, zero drag on closed bodies, and grid independence. also you could test your boundary conditions using acoustic simulations to test for non reflection (if you're using non reflecting BC). i think it's best to stick to problems with analytical solutions. good luck.
  Reply With Quote

Old   December 7, 1999, 20:03
Default Re: Test Cases to validate 2D Euler Schemes
  #4
clifford bradford
Guest
 
Posts: n/a
could you send me information on your code
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
critical error during installation of openfoam Fabio88 OpenFOAM Installation 21 June 2, 2010 04:01
OF 1.6 | Ubuntu 9.10 (64bit) | GLIBCXX_3.4.11 not found piprus OpenFOAM Installation 22 February 25, 2010 14:43
Problems in compiling paraview in Suse 10.3 platform chiven OpenFOAM Installation 3 December 1, 2009 08:21
Test Cases tstorm FLUENT 1 May 27, 2009 04:41
test cases Maciej Matyka Main CFD Forum 3 November 24, 2004 09:27


All times are GMT -4. The time now is 09:14.