design-tool for turbomachinery
 

I'm looking for a design-tool for turbomachinery (all types). It is not necessary to calculate but only to construct the geometry.

Re: design-tool for turbomachinery
 

(1). Just to construct the geometry, you can use 2-D CAD or 3-D CAD programs. (2). There are numerous CAD programs on the market, such as PRO/E, CATIA, AutoCAD,...et. (3). The selection of a particular CAD program depends on many factors, and sometimes, the company politics is also involved.

Re: design-tool for turbomachinery
 

I work for a turbomachinery consulting company (Concepts ETI) which sells all types of turbomachinery design software, including that for geometry generation. Please contact me if you are interested. I would have responded directly to you to avoid commercial posts in this CFD site, but your email address was not present in the 'Posted By' information.

Dan Hinch

dhinch@conceptseti.com

Re: design-tool for turbomachinery
 

Echoing Dan's response re commercial posts on this site, re your request for turbomachinery geometry design tools, please see the following pages for more info.

http://www.aeat.com/cfx/volutegen.html

http://www.aeat.com/cfx/bladegen.html

http://www.aeat.com/cfx/Sascturbo.html

Re: design-tool for turbomachinery
 

We have been reading your question you posted on CFD-online for a turbomachinery blade geometry modeler.

We inform you that NUMECA offers a fully integrated and customized CFD tool for turbomachinery design and analysis.

You will find more information on our web site /http://www.numeca.com or by contacting directly Bruno Gouverneur at bruno@numeca.be.

Best Regards

Stephane Pierret

____________________________________________

Stephane Pierret, CFD Group

NUMECA International

Av. Franklin Roosevelt 5

B-1050 Brussels

Tel: +32 2 647.83.11 / Fax: +32 2 647.93.98

pierret@numeca.be / www.numeca.com

____________________________________________