CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

projecting curved connectors to db in gridgen

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 9, 2008, 12:22
Default projecting curved connectors to db in gridgen
  #1
Mike
Guest
 
Posts: n/a
I'm building a 3-D grid in gridgen to model hydrodynamics through a lake with a complicated geometry. After creating my 2-D mesh, I tried to project the domains to the database for my bathymetry. All of the curved connectors were projected as straight lines from one node to the next. I work with several people who use gridgen and no one has seen this happen before. Any ideas/tips?
  Reply With Quote

Old   October 10, 2008, 12:07
Default Re: projecting curved connectors to db in gridgen
  #2
Chris Sideroff
Guest
 
Posts: n/a
Mike do you have a screenshot of this behavior that you could send me?

Thanks, Chris
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to import NACA 0012 Profile in Gridgen maplepink Main CFD Forum 17 May 7, 2013 14:01
how can I create a curved line in Fluent antonietta paulozza FLUENT 3 December 25, 2010 03:40
[Pointwise] Linking connectors arash Pointwise & Gridgen 2 September 23, 2010 12:44
gridgen memory allocation problem ziad Pointwise & Gridgen 5 February 27, 2010 21:16
Gridgen question vishwas Pointwise & Gridgen 2 February 25, 2006 17:05


All times are GMT -4. The time now is 11:13.