CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

Surface Integration

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 6, 1999, 13:07
Default Surface Integration
  #1
Hassan
Guest
 
Posts: n/a
I am needed something about calculation of surface integration using Gause integration method for a panel (like retangular panels) using high accuracy. This could be able to integrate for a given function and local coordinate, the output of intergal could be obtained. If you know some references or separate subroutine, please tell me to find it. Thanks!
  Reply With Quote

Old   December 6, 1999, 13:34
Default Re: Surface Integration
  #2
John C. Chien
Guest
 
Posts: n/a
(1). Have you looked into college Calculus or Advanced Calculus books ?
  Reply With Quote

Old   December 6, 1999, 14:25
Default Re: Surface Integration
  #3
Hassan
Guest
 
Posts: n/a
I am looking something as residual coefficients that give accurate value over the surface, not simple one. I have many subroutine to do that, now looking n=200, means the number of w(k)and s(k) by more than 200 coef.
  Reply With Quote

Old   December 6, 1999, 16:18
Default Re: Surface Integration
  #4
Adrin Gharakhani
Guest
 
Posts: n/a
You didn't mention whether the functions are singular or regular! Anyway, there are a number of good integration routines at www.netlib.org

Good luck

Adrin Gharakhani
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error : Self intersecting surface mesh, computing intersections & Error : Impossible velan Open Source Meshers: Gmsh, Netgen, CGNS, ... 3 October 22, 2015 11:05
Problem with Gmsh nishant_hull Open Source Meshers: Gmsh, Netgen, CGNS, ... 23 August 5, 2015 02:09
[ICEM] Problems with coedge curves and surfaces tommymoose ANSYS Meshing & Geometry 0 August 5, 2011 16:02
boundaries with gmshToFoam‏ ouafa Open Source Meshers: Gmsh, Netgen, CGNS, ... 7 May 21, 2010 12:43
CFX4.3 -build analysis form Chie Min CFX 5 July 12, 2001 23:19


All times are GMT -4. The time now is 07:21.