|
[Sponsors] |
Air-Water VOF Depressurizing Bottle Validation |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 26, 2009, 13:56 |
Air-Water VOF Depressurizing Bottle Validation
|
#1 |
Guest
Posts: n/a
|
Hi All,
I am looking for some existing validation work that has been done for Air-Water VOF simulations. The specific problem I am interested in is an axi-symmetric tank....very much like an upside down 2litre pop bottle depresurizing. A cylindrical tank draining due to gravity would be useful too. If you know of any good experiments or CFD validation work which would be of use....please let me know. Thanks in advance...............Bak_Flow |
|
January 26, 2009, 14:18 |
Re: Air-Water VOF Depressurizing Bottle Validation
|
#2 |
Guest
Posts: n/a
|
You might take a look at the flow-3d home page. There are links (or pdf's) to an immense number of applications. I didn't try to sort through. Try here:
http://www.flow3d.com/resources/tech...s_tp_main.html Good luck! |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Air-Water VOF Depressurizing Bottle Validation | Bak_Flow | FLUENT | 0 | January 26, 2009 13:57 |
On the damBreak4phaseFine cases | paean | OpenFOAM Running, Solving & CFD | 0 | November 14, 2008 22:14 |
Evaporatin water in the air | Morteza | FLUENT | 1 | August 20, 2008 06:04 |
Terrible Mistake In Fluid Dynamics History | Abhi | Main CFD Forum | 12 | July 8, 2002 10:11 |
uptodate water distribution network | fredius,magige,tanzanian,(e.a) | Main CFD Forum | 0 | January 27, 2002 08:10 |