CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Air flow question

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 18, 2009, 12:39
Default Air flow question
  #1
Bruce
Guest
 
Posts: n/a
In Howell, Michigan in 1999 we built a large air cannon to shoot punkins. The gun is 100 ft. long and weighs 28,000 lbs. The gun is fired using compressed air. We have had great success winning the World Championship Punkin Chunkin contest four times and were the world record holder at 4,434 ft until this year when it was broken by 50 ft. In practice we have shot in excess of 5,000 ft. We did not compete this year because we were unable to make necessary changes to our gun in order to improve performance. We believe if we increase the temperature of air in our holding tanks we can add muzzle velocity by increasing the speed of air in the barrel and therefore increase our distance. Alas, we are but red neck engineers and know very little about fluid dynamics. Therefore, we are asking if our theory is correct. Could anyone help us? Our website is secondamendmentgun.us Thanks for your time.
  Reply With Quote

Old   February 21, 2009, 03:20
Default Re: Air flow question
  #2
kim1987
Guest
 
Posts: n/a
Hi, I am amused to see such a lots of job opportunities here.

kim

Job Search
  Reply With Quote

Old   February 21, 2009, 04:52
Default Re: Air flow question
  #3
Ahmed
Guest
 
Posts: n/a
If you apply the ideal gas equation of state to the air tank you get p = mRT/V i.e. the pressure will increase as you increase the temperature.

Now how this increase in pressur will affect the rest of your contraption, I can not say, you need to see the whole system. Enjoy your time and good luck
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Density of air for calculating the mass flow rate from Darcy's law Hermano Main CFD Forum 0 August 22, 2011 11:17
Simulation of air flow inside valve - FSI? Help! farianka Main CFD Forum 0 April 17, 2011 16:30
Steam in air flow henj FLUENT 0 January 11, 2010 07:17
air flow through porous pipe faiz rauf FLUENT 3 August 11, 2004 15:08
HELP!!! Indoor air flow pattern Peter Zhang Main CFD Forum 4 November 3, 1999 02:49


All times are GMT -4. The time now is 13:37.