CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

MapFields to Axisymmetric Mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 15, 2016, 06:11
Default MapFields to Axisymmetric Mesh
  #1
New Member
 
Adkar
Join Date: Apr 2015
Posts: 18
Rep Power: 10
adkar is on a distinguished road
Could anyone explain how to map from a normal 2D mesh to axisymmetric mesh of the same 2D mesh?
The initial 2D mesh has 5 patches. (Up Down Right Left frontAndback [empty])
while the axisymmetric mesh (after using makeAxialMesh utility) has 6 patches(up down right left[axis] frontAnd Back_pos [wedge] frontandback_neg[wedge])

It would be really helpful if someone could explain how to use mapFields between these two types of meshes.

I get an error if I use Mapfields utility directly (for a certain region).
adkar is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] problems generating clean mesh Christian_tt OpenFOAM Meshing & Mesh Conversion 2 June 20, 2019 06:39
Star CCM Overset Mesh Error (Rotating Turbine) thezack Siemens 7 October 12, 2016 12:14
[snappyHexMesh] SnappyHexMesh no layers and no decent mesh for complex geometry pizzaspinate OpenFOAM Meshing & Mesh Conversion 1 February 25, 2015 08:05
[ICEM] Problem making structured mesh on a surface froztbear ANSYS Meshing & Geometry 4 November 10, 2011 09:52
[snappyHexMesh] external flow with snappyHexMesh chelvistero OpenFOAM Meshing & Mesh Conversion 11 January 15, 2010 20:43


All times are GMT -4. The time now is 17:32.