|
[Sponsors] |
please...help me.."self- intersection problem" |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 20, 2016, 07:25 |
please...help me.."self- intersection problem"
|
#1 |
New Member
CYS
Join Date: Jun 2016
Posts: 1
Rep Power: 0 |
Hello, i'm an udergraduate student in Seoul.
Before beginning, please excuse me of my poor English(i'm not good at English at all) recently i started to use 'Star ccm+' for my graduation assignment. my topic is 'Double Skin facade system' and i designed a model of the room for comparison( a living room , which has inside sliding window, balcony of 30cm width and outside window. ) then, i simplified that model into Star ccm+ CAD model which has walls and windows without thickness( i represented those as 'sheets') at first, i made it as a room with an ostide window('body2' in the cpature file 'model1') and a seperate inside window('body9'). i tried to volume mesh th 'model1' but as you can see in the capture files ('model1-1,2' ) the simulation program didn't seem to recognize the inside window('body 9') and i cannot find any trace of 'meshing' on the surface of 'body9'! so i tried another model('model2-2' the attatched capture file). i made it as two boxes ('body18', the room space, and 'body26', the bacony space.) . those two bodies respectively have a face that is same for each others'.( You can see same parts 'win1', 'win1op1' and 'win1op2' in both 'body 18' and 'body26' in the capture file 'm2-..') Ofcourse i attempted to volume mesh this second model. however, in thistime, 'self- intersection' error meesage comes out. How can I deal with this situation? Please give me some advice to me. I don't have enought time for due date and no peers who can help me about this problem... |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
intersection of meshes in centrifugal pump | eng_norouzi | CFX | 0 | October 4, 2011 03:45 |
[GAMBIT] 3D mesh for pipe intersection | pranab_jha | ANSYS Meshing & Geometry | 3 | May 28, 2010 01:33 |
Polyline at intersection of two planes | Francesco | CFX | 2 | July 29, 2009 08:03 |
intersection of two cubes. | park | Main CFD Forum | 2 | July 1, 2009 03:19 |
meshing at a pipe intersection | cyn | FLUENT | 0 | December 20, 2006 02:16 |