Using CFD to calculate minor loss coefficient

mariejanethompson · November 18, 2016, 10:56

If I model a 90 degree bend (turbulent where v=1m/s and d=0.01m) and I get a pressure reading from a monitor before the bend (e.g. 1500Pa), and a pressure reading from another monitor after the bend (e.g. 500Pa) how do I work out the minor loss coefficient from this?

Is CFD calculating the major loss? (1500-500=1000Pa)?

FMDenaro · November 18, 2016, 11:02

Provided you set the correct physical and mathematical model, the correct boundary conditions, provided that your scheme is consistent and stable, your problem has a Re number of O(10^3) that allows a CFD code to run in DNS condition. That means you get all the variables you want.

November 18, 2016, 10:56	Using CFD to calculate minor loss coefficient	#1
mariejanethompson New Member Join Date: Nov 2016 Posts: 3 Rep Power: 9	If I model a 90 degree bend (turbulent where v=1m/s and d=0.01m) and I get a pressure reading from a monitor before the bend (e.g. 1500Pa), and a pressure reading from another monitor after the bend (e.g. 500Pa) how do I work out the minor loss coefficient from this? Is CFD calculating the major loss? (1500-500=1000Pa)?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ansys CFX problem: unexpected very high temperatures in premix laminar combustion	faizan_habib7	CFX	4	February 1, 2016 17:00
CFD Design...The CFD Future	John C. Chien	Main CFD Forum	20	November 19, 2015 23:40
How to calculate heat transfer coefficient in FLUENT?	ReVl27	FLUENT	3	November 12, 2015 00:44
Automotive test case	vinz	OpenFOAM Running, Solving & CFD	98	October 27, 2008 08:43
public CFD Code development	Heinz Wilkening	Main CFD Forum	38	March 5, 1999 11:44

November 18, 2016, 11:02		#2
FMDenaro Senior Member Filippo Maria Denaro Join Date: Jul 2010 Posts: 6,768 Rep Power: 71	Provided you set the correct physical and mathematical model, the correct boundary conditions, provided that your scheme is consistent and stable, your problem has a Re number of O(10^3) that allows a CFD code to run in DNS condition. That means you get all the variables you want.