CFD Online Logo CFD Online URL
Home > Forums > General Forums > Main CFD Forum

Drying of Clay

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 7, 2000, 13:08
Default Drying of Clay
James Hampson
Posts: n/a
Dear sir/madam, I have been approached with a problem concerning the drying of clay in a rotary kiln. Hot air, 1200 degrees centigrade is injected into the kiln, which reacts with the clay releasing gasses into the kiln. Once the clay has reached approx. 600 degrees C the gasses combust with the air. VOC's are combusted, but not all. I would like to model this process and I wondered if anyone had carried out any similar analysis. Any response would be greatful. Thanks. James Hampson
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
CFD modeling of drying of spices gagi STAR-CD 0 March 27, 2011 13:19
Microwave drying modeling jpcfd FLUENT 0 June 8, 2010 14:25
Honestly: Can drying be modelled with Phoenics? Alumna Phoenics 8 September 26, 2005 12:03
drying problem centaur FLUENT 0 March 24, 2005 13:53
How to Model Three Phase Clay Slurry in CFX 5.5 J.Yang CFX 2 August 28, 2002 12:06

All times are GMT -4. The time now is 16:18.