 |
 |
 |
|
|
|
[Sponsors] | ||||
How does the solver solve for Singhal model for cavitation? |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 18, 2018, 10:57
|
How does the solver solve for Singhal model for cavitation?
|
#1 |
|
New Member
Jheel
Join Date: Jul 2018
Posts: 1
Rep Power: 0  |
Im unable to know how the solver takes up the inital conditions and solves the equations for cavitating flow.
According to my understanding, the solver first solves the k-e model (at vapour volume fraction f=1) to derive at values of pressure inside each control volume and implements cavitation model whenever pressure is lesser than vapour pressure. But im unable to understand the further approach of solver to model it using transport equations and rayleigh plesset model. Which are the unknows in equations and how their values are derived. Last edited by Jheel; July 18, 2018 at 12:19. |
|
|
|
|
|
| Tags |
| cavitation, coding, rayleigh, singhal, solver |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| about mass transfer model in reactingTwoPhaseEulerFoam solver | openfoammaofnepo | OpenFOAM Programming & Development | 3 | June 27, 2019 04:26 |
| [ANSYS Meshing] Help with element size | sandri_92 | ANSYS Meshing & Geometry | 14 | November 14, 2018 07:54 |
| Solver consists of DPM, P1 radiation, k-E model | mvee | OpenFOAM Pre-Processing | 0 | March 23, 2015 01:01 |
| thobois class engineTopoChangerMesh error | Peter_600 | OpenFOAM | 4 | August 2, 2014 09:52 |
| Blow of compressible solver while using K-epsilon model in openfoam | Amit Mathur | OpenFOAM | 16 | October 6, 2013 11:09 |
Linear Mode
