scale model of a a tube

ozalzi · July 29, 2018, 12:27

Hi,
Im working on a CFD 3D model of laminar fluid flow along tube with ADINA 9.4.

There is a portion of the tube that i want to model as porous medium in order to mimic the flow resistance of a longer tube, i.e.:
1 meter of laminar flow inside rigid tube will be scaled down to 10 centimeter of porous media.

The parameters requested by the ADINA that i have trouble to properly calculate are the porosity and permeability of the material.

any ideas? other solution methods may help too.
thanks,
Oren

LuckyTran · August 3, 2018, 16:11

What's more important is the Darcy-Forchheimer coefficients. The porosity and permeability do not affect the pressure drop in the theory of LIH porous media. But, what often happens is that there is a correlation for the Darcy and Forchheimer coefficients based on permeability (usually a correlation based on packed beds). Maybe you only have the Darcy term and no Forchheimer term.

I'm clueless about ADINA but you have to dig around to figure out how exactly it calculates the pressure drop.

July 29, 2018, 12:27	scale model of a a tube	#1
ozalzi New Member Join Date: Jul 2018 Posts: 1 Rep Power: 0	Hi, Im working on a CFD 3D model of laminar fluid flow along tube with ADINA 9.4. There is a portion of the tube that i want to model as porous medium in order to mimic the flow resistance of a longer tube, i.e.: 1 meter of laminar flow inside rigid tube will be scaled down to 10 centimeter of porous media. The parameters requested by the ADINA that i have trouble to properly calculate are the porosity and permeability of the material. any ideas? other solution methods may help too. thanks, Oren

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Use of k-epsilon and k-omega Models	Jade M	Main CFD Forum	40	January 27, 2023 07:18
Turbulence model, in-line tube bank	zubs	Main CFD Forum	0	April 23, 2015 10:57
Water subcooled boiling	Attesz	CFX	7	January 5, 2013 03:32
Maximum wind speed and model scale?	sonam	FLUENT	4	July 1, 2012 11:57
How to model a long tube embedded in the earth?	stefanie	FLUENT	2	May 17, 2007 14:35

August 3, 2018, 16:11		#2
LuckyTran Senior Member Lucky Join Date: Apr 2011 Location: Orlando, FL USA Posts: 5,674 Rep Power: 65	What's more important is the Darcy-Forchheimer coefficients. The porosity and permeability do not affect the pressure drop in the theory of LIH porous media. But, what often happens is that there is a correlation for the Darcy and Forchheimer coefficients based on permeability (usually a correlation based on packed beds). Maybe you only have the Darcy term and no Forchheimer term. I'm clueless about ADINA but you have to dig around to figure out how exactly it calculates the pressure drop.