CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Boussinesq approximation again

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 17, 2000, 08:01
Default Boussinesq approximation again
  #1
Gabriel
Guest
 
Posts: n/a
Hi everybody, I have still a problem concerning the Boussinesq approximation about the density variation connected with the temperature, in the incompressible flows. I know that it's better to use this approximation with little differences of temperature. My question is: if I use this approximation with high differences of temperature, how much is my error, how can I valutate it ? Do you know other approximations for incompressible flows that point their attention to the buoyancy forces? Thank you, Gabriel

P.S. I hope I've been clear enough, but I'm a little bit confused yet.
  Reply With Quote

Old   April 18, 2000, 05:28
Default Re: Boussinesq approximation again
  #2
Sergei Chernyshenko
Guest
 
Posts: n/a
Hi, Gabriel.

OK, I'll explain.

An error arises due to neglecting certain terms in equations. Consider, for simplicity, 2D steady continuity equation

d(\rho u)/dx + d(\rho v)/dy=0

It can be rewritten as

(ud\rho/dx + vd\rho/dy)/\rho + du/dx + dv/dy=0

In Boussinesq approximation it becomes

du/dx + dv/dy=0

This is a good approximation if

(ud\rho/dx + vd\rho/dy)/\rho << du/dx + dv/dy

Suppose the characteristic velocity scale is U and length scale is L

Then

du/dx ~ dv/dy ~ U/L

d\rho/dx ~ d\rho/dy ~ delta \rho / L. Substitute and obtain (do it!)

that the approximation is good if

delta \rho / \rho << 1

This quantity, delta \rho / \rho, is a measure of the relative error. Take a handbook on fluid properties and find what is delta \rho for given temperature variations, divide by \rho and this is it. For gases it does not matter if you use adiabatic formulae or constant pressure formulae since this is a crude estimate only anyway.

If the error turns out to be too large you have to use the full equations I am afraid.

Rgds, Sergei
  Reply With Quote

Old   April 20, 2000, 04:55
Default Re: Boussinesq approximation again
  #3
Gabriel
Guest
 
Posts: n/a
Thank you for your explanation. It's very precious. Just a thing: when I make the calculus (delta rho)/rho to measure the relative error, the rho I have to consider is the rho at the lowest temperature in the ambient I'm studing, is that correct ?

Yours, Gabriel.
  Reply With Quote

Old   May 11, 2000, 10:24
Default Re: Boussinesq approximation again
  #4
Sergei Chernyshenko
Guest
 
Posts: n/a
Hi, Gabriel,

Sorry for not answering earlier. I was a bit busy

Let delta\rho = \rho_high - \rho_low > 0

Then, say,

error1 = delta\rho / \rho_high=1- \rho_low/\rho_high,

error2 = delta\rho / \rho_low =1- \rho_high/\rho_low,

Therefore, as soon as error1 << 1 or error2 << 1,

\rho_low is quite close to \rho_high

Then

error1/error2 = \rho_low / \rho_high is quite close to 1.

Hence, the answer to your question is: it does not matter. May be it is easier to understand if you notice that delta\rho/\rho is not the exact value of the relative error. It is a crude estimate only. The real error can be several times greater, for example.

Yours Sergei

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
InterFoam with boussinesq approximation sinusmontis OpenFOAM Running, Solving & CFD 2 October 25, 2020 13:21
Boussinesq approximation Abdul Aziz Jaafar Main CFD Forum 19 May 3, 2019 12:00
Boussinesq approximation, help please! engahmed FLUENT 0 May 20, 2010 12:25
Question on boussinesq approximation panos_metal FLUENT 1 January 11, 2010 12:18
boussinesq approximation jamal FLUENT 2 March 25, 2008 09:57


All times are GMT -4. The time now is 10:15.