 |
 |
 |
|
|
|
[Sponsors] | ||||
Applying k-kl-w turbulence model in Peric code |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 23, 2019, 03:08
|
Applying k-kl-w turbulence model in Peric code
|
#1 |
|
New Member
mina baba
Join Date: Jul 2019
Posts: 1
Rep Power: 0  |
Hi Everyone
 I try to apply the k-kl-w turbulence model of Walters & Cokljat to Peric code for a pipe.I compare results with openfoam and fluent, but results for any quantity is different. Can anyone help me? The results are: 1-u-velocity profile has not turbulence profile while flow is turbulence(Re>5000) 2-Turbulence viscosity is calculated low and the profile of it is different with openfoam. 3.Turbulence kinetic energy is low(3-order) but the profile is has same trend with openfoam (have a peak point near wall). 4.omega is low and the profile of it has different profile with openfoam.(has maximum quantity in centerline) 
|
|
|
|
|
|
| Tags |
| k-kl-omega, peric, transition model |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem with creating R file for SSG turbulence model | Khozaei4000 | OpenFOAM Running, Solving & CFD | 3 | April 26, 2022 17:02 |
| Wrong flow in ratating domain problem | Sanyo | CFX | 17 | August 15, 2015 07:20 |
| An error has occurred in cfx5solve: | volo87 | CFX | 5 | June 14, 2013 18:44 |
| how to code Spalart-Allmaras turbulence model in unstructured mesh? | ervasph | Main CFD Forum | 0 | April 23, 2009 09:46 |
| open source code of k-e turbulence model. | karuna | Main CFD Forum | 1 | June 4, 2006 11:09 |
Linear Mode
