CFD Online Logo CFD Online URL
Home > Forums > General Forums > Main CFD Forum

partially premixed combustion with two oxidizers

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   January 13, 2020, 09:16
Default partially premixed combustion with two oxidizers
Join Date: Apr 2012
Posts: 66
Rep Power: 10
hnemati is on a distinguished road
Dear all
I am planning to perform a combustion simulation with partially premixed combustion model with on fuel and two oxidizers. I was wondering how to define the first (f) and second (f_sec) mixture fraction and flame speed?
based on what I read from Fluent manual (, If I use (fuel/oxid_1) and (oxid_2/oxid_1) to calculate the flame speeds, it gives me zero values for flame speed for the secondary mixture fraction. I am sure this is not correct. Can anybody help me to define a correct combination of the streams?
hnemati is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Exact differenc between partially premixed combustion and species transport in fluent Jegan FLUENT 7 December 3, 2019 05:23
Is it possible to make a compressible partially premixed combustion in Fluent? tsi07 FLUENT 2 November 16, 2018 10:00
Reverse flow with Partially premixed combustion navneet FLUENT 0 May 28, 2016 00:57
How to model premixed combustion using partially premixed combustion model in Fluent? sab10012 FLUENT 0 October 6, 2015 01:18
Partially Premixed Combustion - Direct Fired Boiler oknus FLUENT 0 April 10, 2012 10:52

All times are GMT -4. The time now is 05:43.