CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Water-Water Vapour Pressure Validation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 26, 2020, 08:12
Default Water-Water Vapour Pressure Validation
  #1
New Member
 
TheAnswer
Join Date: Sep 2017
Posts: 8
Rep Power: 8
Avni is on a distinguished road
Hi guys ,

Recently I was studying on water-water vapour in 2D cap here is case;

*Materials ; Water Liquid, Water Vapour(With constant density)
*Unsteady
*k-w SST turbulence model
*Coupled Solver
*VOF Model
*Water Liquid primary phase and vapour is secondary phase
*Evaporation-Condensation Lee model (With constant saturation temp)
*Temperature boundary condition about 4 walls
*372.5 K initial condition
*1 Atm absolute pressure initialization (All system has 1 atm pressure at the beginning)



I know constant saturation temperature and constant vapour density is wrong instead constant they have to dependent pressure/temperature.

I have 3 question about this case ;

1- How should I define Water Vapour ?

Do I have to write UDF for saturation temperature and density ?

2- How should I calculate Standart State Enthalpy for any material ?

I search a lot found that if I use Latent Heat * Molecular Weight
(2442 kJ/kg)*(18.01528 kg/kmol) = 43993.31376 kJ/kmol

But fluent default values are different and also in Ansys tutorial they use 0 for liquid as I expect but 2.992325e+07 for Standart State Enthalpy how they calculate this value ?

Here is Tutorial Link Below;
https://www.researchgate.net/profile...n+tutorial.pdf

3- VOF Evaporation-Condensation Model is right ?
Avni is offline   Reply With Quote

Reply

Tags
evaporation, multiphase, standart state enthalpy, vof, water+water vapour

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind tunnel Boundary Conditions in Fluent metmet FLUENT 6 October 30, 2019 13:23
No liquid water exist in my Fuel Cell simulation fatchang FLUENT 19 October 15, 2018 15:27
I am NOT getting right pressure at the air inlet in water column kcfd FLUENT 2 November 27, 2012 22:36
I am NOT getting right pressure at the air inlet in water column kcfd FLUENT 0 November 25, 2012 00:14
Hydrostatic pressure in 2-phase flow modeling (long) DS & HB Main CFD Forum 0 January 8, 2000 16:00


All times are GMT -4. The time now is 08:38.