CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Coupling AcuSolve (Output .h3d results) with SimLab for Linear Static Analysis

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 5, 2020, 14:16
Default Coupling AcuSolve (Output .h3d results) with SimLab for Linear Static Analysis
  #1
New Member
 
Mohamed
Join Date: Jan 2019
Posts: 21
Rep Power: 4
gaddora165 is on a distinguished road
Hi,

I have completed solving a CFD analysis for slug flow development in pipeline and obtained the output results in .h3d format (via AcuOut --> export .h3d).

I would like to utilize those results (pressure, wall shear stress, moment, velocity) and perform linear structural analysis via SimLab.

1) I have imported directly the .h3d format into SimLab (Model Result + Model Data : without creating the solution). then I have proceed to create a solution via chosing AcuSolve Solver. but then I have encountered an error stating : AcuSolve Failed to Run.


2) then I have tried to import .h3d format into SimLab again (Model Result + Model Data : with the creating solution). I have found that solution is imported but the solver have been chosen by default to be Optistruct. but then I have created another solution by chosing AcuSolve Solver. then I can see the results. but when I have tried to create another solution for Linear Static, I have encountered another error : Check Optistruct Input File.

I have tried to go through all the tutorials and training materials , but I could not manage to import .h3d format results and use it for my structural analysis.

could you please assist to check how would i need to move forward ?

Do i follow steps in bullet item (1) or follow the one in bullet item (2) as per above ?
gaddora165 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluent Giving Different Results For Same Analysis Setup Murwin12 FLUENT 0 March 6, 2019 12:00
Explicit dynamics results for initial condition to another explicit dynamics analysis KOI Structural Mechanics 0 March 2, 2018 05:16
CFX FSI Fatal Error unbanana CFX 0 October 3, 2015 06:57
RNG diverged during the analysis the flow over a multi element airfoil, why? s.m OpenFOAM Running, Solving & CFD 0 August 5, 2013 09:39
Eigenfrequencies static and modal analysis Laura_mecheng ANSYS 1 May 15, 2012 04:40


All times are GMT -4. The time now is 15:34.