CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Nonlinear turbulence models

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 21, 2000, 01:32
Default Nonlinear turbulence models
  #1
Zhong Lei
Guest
 
Posts: n/a
Is there anyone who has experiences in using Gatski-Speziale non-linear turbulence model? I am just writing a routine for test. The test problem is chanel flow with Re=2e4 based on the width. I find that the result of GS model is too bad when compared with other low-Re models. Although the authors argued that this model can be integrated directly to sublayer region and the wall, it works very poor near the wall and even in the log-law region. I wonder whether my conclusion is right or wrong. Can you recommend any low-Re non-linear model which works in low-Re flow?

Thanx in advance

Lei
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Turbulence postprocessing Mohsin FLUENT 2 October 3, 2016 15:18
Incompressible Turbulence models achinta OpenFOAM 4 May 27, 2010 11:35
Discussion: Reason of Turbulence!! Wen Long Main CFD Forum 3 May 15, 2009 10:52
How to set phase dependent turbulence models? J.Yang CFX 2 August 29, 2002 16:39


All times are GMT -4. The time now is 23:01.