Finding enthalphy for tee junction

Dhanik desai · April 29, 2020, 01:39

I am simulating tee junction, 2 inlets and 1 outlet, hot inlet temp is 36 c & cold inlet temp is 19 c, hot inlet velocity is 3 m/s and cold inlet velocity is 12m/s

By simulation, I get 2559.11 J/kg enthalpy at an outlet , How to find enthalpy at an outlet by equation

Formula is
h(mixing)=m(hot)*h(hot)+m(cold)*h(cold)/m(total)

How to find h hot and h cold?
Material is air

LuckyTran · April 29, 2020, 05:05

You need an equation of state. If you are doing a simulation of some sort, the equation of state is a user setting.

Dhanik desai · April 29, 2020, 05:28

Hi sir , thanks for reply I want to find h hot and h cold manually

agd · April 29, 2020, 08:58

You will need to use the equation of state to evaluate the enthalpy by hand. For this you need thermodynamics, but here's a hint. For air at the temperatures you are working with the enthalpy can be expressed to a high degree of accuracy as h = Cp * T, where Cp is the specific heat at constant pressure.

Dhanik desai · May 1, 2020, 05:53

Thank you, sir, I did it with Cp *delta t where Tref is 298.15K

April 29, 2020, 01:39	Finding enthalphy for tee junction	#1
Dhanik desai New Member dhanik Join Date: Oct 2019 Posts: 10 Rep Power: 6	I am simulating tee junction, 2 inlets and 1 outlet, hot inlet temp is 36 c & cold inlet temp is 19 c, hot inlet velocity is 3 m/s and cold inlet velocity is 12m/s By simulation, I get 2559.11 J/kg enthalpy at an outlet , How to find enthalpy at an outlet by equation Formula is h(mixing)=m(hot)h(hot)+m(cold)h(cold)/m(total) How to find h hot and h cold? Material is air Last edited by Dhanik desai; April 29, 2020 at 05:28.

April 29, 2020, 05:05		#2
LuckyTran Senior Member Lucky Join Date: Apr 2011 Location: Orlando, FL USA Posts: 5,672 Rep Power: 65	You need an equation of state. If you are doing a simulation of some sort, the equation of state is a user setting. Dhanik desai likes this.

April 29, 2020, 08:58		#4
agd Senior Member Join Date: Jul 2009 Posts: 351 Rep Power: 18	You will need to use the equation of state to evaluate the enthalpy by hand. For this you need thermodynamics, but here's a hint. For air at the temperatures you are working with the enthalpy can be expressed to a high degree of accuracy as h = Cp * T, where Cp is the specific heat at constant pressure. Dhanik desai likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Meshing junction between wing and nacelle using algebraic extrusion method	zacwhee	Pointwise & Gridgen	0	March 23, 2018 00:39
[ICEM] mesh T junction with no same diameter	black_hunter	ANSYS Meshing & Geometry	0	August 28, 2016 20:52
User Junction Box in CFX: Example 1 from the Solver Modeling Guide	gt_moe	CFX	3	May 26, 2016 10:40
[ICEM] Blocking strategy for sharp angle junction (Pipe)	Daniel_Khazaei	ANSYS Meshing & Geometry	6	February 19, 2015 11:31
Junction Box	Anil	CFX	2	June 27, 2006 10:18

April 29, 2020, 05:28		#3
Dhanik desai New Member dhanik Join Date: Oct 2019 Posts: 10 Rep Power: 6	Hi sir , thanks for reply I want to find h hot and h cold manually

May 1, 2020, 05:53		#5
Dhanik desai New Member dhanik Join Date: Oct 2019 Posts: 10 Rep Power: 6	Thank you, sir, I did it with Cp *delta t where Tref is 298.15K