|
Cross-check: Simulation Settings
1 Attachment(s)
Hi,
I am using the domain as shown in the picture below. The blade rotates clockwise in XY plane, and the flow direction is along Z axis. Considering the reference coordinate system, I specified the directions as below; Correct me if I am wrong. Direction of rotation: [0,0,1] Flow Direction: [0,0,1] Velocity in Initial Conditions: [0,0,8 m/s] Direction for drag coefficient: [0,0,1] Direction for moment coefficient: [0,0,-1] Regards, |
| All times are GMT -4. The time now is 12:38. |