Export a Gmsh Mesh to CFX

Tobi7 · July 15, 2020, 11:54

Hello,

i build a Mesh in the open source software Gmsh and want to run a simulation with CFX. Does anyone know how i can do this?

I tryed it, but then in CFX is an error, "No 3D elements imported".

Thanks

AtoHM · July 17, 2020, 10:45

I tried this too some time ago, I cant probably remember what worked, but I was able to get all the elements in with some format, but it didn't work with any other format. I remember using an OpenFOAM-tool to convert the mesh to some OF mesh and going from there to get a cfx mesh. Quite the hassle.

July 15, 2020, 11:54	Export a Gmsh Mesh to CFX	#1
Tobi7 New Member Join Date: Jul 2020 Posts: 1 Rep Power: 0	Hello, i build a Mesh in the open source software Gmsh and want to run a simulation with CFX. Does anyone know how i can do this? I tryed it, but then in CFX is an error, "No 3D elements imported". Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
export comsol mesh into ansys or cfx	amazdeh	ANSYS Meshing & Geometry	1	June 9, 2017 09:18
StarCCM+ mesh export to CFX	fluidmechanics	STAR-CCM+	0	June 21, 2015 15:52
[ICEM] How to export Icem mesh to Cfx?	darazsbence	ANSYS Meshing & Geometry	11	February 23, 2013 14:09
[ICEM] Problem with export mesh icem to CFX	TallesC	ANSYS Meshing & Geometry	6	February 6, 2013 09:56
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55

July 17, 2020, 10:45		#2
AtoHM Senior Member M Join Date: Dec 2017 Posts: 642 Rep Power: 12	I tried this too some time ago, I cant probably remember what worked, but I was able to get all the elements in with some format, but it didn't work with any other format. I remember using an OpenFOAM-tool to convert the mesh to some OF mesh and going from there to get a cfx mesh. Quite the hassle.