|
[Sponsors] |
October 3, 1998, 10:01 |
Torque Conveter reasearch
|
#1 |
Guest
Posts: n/a
|
I work for a Torque Converter reconditioning co. in Australia. I design and produce "High Stall/High Performance" Torque conveters. Wondering if anyone can point me in the direction of some research/facts/figures in this field. Anything would be appreciated. Thanks, Mark
|
|
October 8, 1998, 11:13 |
Re: Torque Conveter reasearch
|
#2 |
Guest
Posts: n/a
|
Check out SAE since 1992. My recollection is that the first seminal paper on the subject was by Toyota (or one of the other Japanese auto companies). It is a nice introduction to the challange of this calculation, and shows results for their designs. I also believe that Star-CD did a significant project on Torque converters around 1995-6 and I have seen some pretty pics on one of their posters that I assume is the output of that work.
This is not an easy calculation due to the importance of time dependent effects between rotor and stator blades with a gap that is very tight Good luck. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Torque calculation of 2D VAWT Wind Turbine | Anonymized_JL1 | FLUENT | 14 | September 26, 2013 03:35 |
positive and negative torque forces | Wei-Haur Lam | CFX | 0 | March 19, 2008 07:45 |
Torque definition | Yali | CFX | 2 | January 7, 2008 03:13 |
about use macro to compute torque in TASCflow | lancy | CFX | 0 | June 10, 2003 06:19 |
Torque calculations. | J. Keays | CFX | 21 | July 12, 2001 09:03 |