Poor heat transfer in CHT
Hello,
I'm doing FSI simulation using Abaqus CFD and Abaqus Standard modules. Boundary condition: fluid inlet velocity = 6 m/s fluid inlet temp = 293K outlet pressure = 3bar solid and fluid initial temperature = 1100K No slip on solid part in CFD module. After 60 seconds of simulation temperature dropped by only 20K. I know from data, that temperature should be lower by 70K. I already checked material properties few times. I have no idea what I do not include in the simulation Thanks in advance |
All times are GMT -4. The time now is 01:33. |