Help me plz!

Pups · June 16, 2021, 07:01

Hi everyone!

Guys, such a question
I want to calculate the degree of air ionization at high speed.
So, the question is: Can I do this in FloEFD, if so, please give me some info or a manual on how to do it
The second question is whether there are any tutorials on FloEFD because there are a lot of questions, even if we consider aerodynamics by trajectory.
If someone from Russia give contacts plz

aerosayan · June 17, 2021, 05:57

Don't know that software.
If you or your college/employer have a valid license, ask the company for support for the FLowEFD software.
Most likely they have tutorials for the case you're trying to simulate.
Else, directly go to their support forums and ask the question.

AtoHM · June 17, 2021, 06:09

There is a subforum here: https://www.cfd-online.com/Forums/fl...orks-flotherm/
That will be the best place to ask, besides the option aerosayan pointed out. Good luck!

June 16, 2021, 07:01	Help me plz!	#1
Pups New Member Sergey Join Date: May 2020 Posts: 2 Rep Power: 0	Hi everyone! Guys, such a question I want to calculate the degree of air ionization at high speed. So, the question is: Can I do this in FloEFD, if so, please give me some info or a manual on how to do it The second question is whether there are any tutorials on FloEFD because there are a lot of questions, even if we consider aerodynamics by trajectory. If someone from Russia give contacts plz

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I'm newbie in OpenFoam plz help	pmne324	OpenFOAM Running, Solving & CFD	1	March 15, 2016 03:41
[GAMBIT] Gambit Start Up error .... HELP PLZ!	Abhya	ANSYS Meshing & Geometry	2	July 12, 2012 00:40
plz help its urgent	garima chaudhary	FLUENT	0	September 25, 2007 05:28
plz ......help me out.....************************	krishna	FLUENT	2	January 10, 2007 02:53
How to export from Acad into gambit plz!	pah	FLUENT	2	April 28, 2005 01:50

June 17, 2021, 05:57		#2
aerosayan Senior Member Sayan Bhattacharjee Join Date: Mar 2020 Posts: 495 Rep Power: 8	Don't know that software. If you or your college/employer have a valid license, ask the company for support for the FLowEFD software. Most likely they have tutorials for the case you're trying to simulate. Else, directly go to their support forums and ask the question.

June 17, 2021, 06:09		#3
AtoHM Senior Member M Join Date: Dec 2017 Posts: 642 Rep Power: 12	There is a subforum here: https://www.cfd-online.com/Forums/fl...orks-flotherm/ That will be the best place to ask, besides the option aerosayan pointed out. Good luck!