CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

SSIIM 1 - Error in continuity-ssimple

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 25, 2021, 09:56
Question SSIIM 1 - Error in continuity-ssimple
  #1
New Member
 
Joana
Join Date: Jul 2021
Posts: 2
Rep Power: 0
joanaCFD is on a distinguished road
Hello,

I'm using SSIIM software to simulate the flow field in a diversion channel (where the flow is extracted from the main channel - opposite case of a confluence). I have a topography measured from a laboratory experiment, which I use as the bed in my simulations (with the topography I created the geodata file, and then the koordina file). So, I have a fixed and deformed bed (with a big cavity downstream of the diversion entrance).

Some of the data sets I use in the control file are (steady computations):

F 16 0.00338 grain roughness
G 7 0 1 35 68 2 20 0 0 0.029 1.0 0.0 0.0 inflow area
G 7 1 -1 35 68 2 20 0 0 0.023 1.0 0.0 0.0 outflow area
G 7 1 2 140 152 2 20 0 0 -0.006 0.0 -1.0 0.0 side outflow area
G 13 1 2 139 2 34 2 20 outblock
G 13 1 153 399 2 34 2 20 outblock

I also use W 4 data set to define a wall for every side of the out blocks I defined, and data sets G 6 and K 1 for a moving water surface.

In the attachments, there is a figure with the grid.

After thousands of iterations, my runs stop, returning, in the boogie file, the message "Error in continuity-ssimple". I've tried to figure out what causes this error, but I didn't succeed. Does anyone know what could lead to this?

Thank you in advance for your attention and any help!
Attached Images
File Type: png grid.png (15.2 KB, 1 views)
joanaCFD is offline   Reply With Quote

Reply

Tags
continuity, error, ssiim

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
pimpleDyMFoam computation randomly stops babapeti OpenFOAM Running, Solving & CFD 5 January 24, 2018 06:28
Floating point exception error lpz_michele OpenFOAM Running, Solving & CFD 53 October 19, 2015 03:50
Upgraded from Karmic Koala 9.10 to Lucid Lynx10.04.3 bookie56 OpenFOAM Installation 8 August 13, 2011 05:03
IcoFoam parallel woes msrinath80 OpenFOAM Running, Solving & CFD 9 July 22, 2007 03:58
Could anybody help me see this error and give help liugx212 OpenFOAM Running, Solving & CFD 3 January 4, 2006 19:07


All times are GMT -4. The time now is 14:58.