How to export a csv file for a specific curve in a geometry?

sensitiveLook · July 15, 2022, 07:11

I wanted to generate a polyline in Post-CFD but with the help of 'From File' because other methods didn't work.

sensitiveLook · July 15, 2022, 13:07

I created this question and I am answering it because I found a way and I think this will be helpful to someone.
So just open your geometry in ICEM CFD, check the Surfaces. -> Go to Create/Modify Curve under Geometry tab.-> Select the required surface-> Click on Surface Parameter present at the left bottom. Adjust the parameter to get your required curve->Apply.

Then,in the left tree, right click on Parts-> Create Part->Choose the curve you created->Apply->OK. Delete other parts (curves/surfaces you don't want) and save the geometry as a .tin file.
Then go to the folder where your .tin file is saved, and open the file with Notepad.
In the opened file, you can go scroll down to get the points of your curve, with an extra index.
Copy those datapoints and create a new file in excel and using Text import wizard, delimit at a comma and paste. Remove the last index column.
Now you can save the file as a .csv file and import it in CFD post to get the required polyline.

July 15, 2022, 07:11	How to export a csv file for a specific curve in a geometry?	#1
sensitiveLook New Member Join Date: Jun 2022 Posts: 11 Rep Power: 3	I wanted to generate a polyline in Post-CFD but with the help of 'From File' because other methods didn't work.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A CFX-POST error (ver 14.5.7)	wangyflp88	CFX	2	July 22, 2017 00:17
[OpenFOAM.org] Error creating ParaView-4.1.0 OpenFOAM 2.3.0	tlcoons	OpenFOAM Installation	13	April 20, 2016 17:34
centOS 5.6 : paraFoam not working	yossi	OpenFOAM Installation	2	October 9, 2013 01:41
[OpenFOAM] Annoying issue of automatic "Rescale to Data Range " with paraFoam/paraview 3.12	keepfit	ParaView	60	September 18, 2013 03:23
Version 15 on Mac OS X	gschaider	OpenFOAM Installation	113	December 2, 2009 10:23

July 15, 2022, 13:07		#2
sensitiveLook New Member Join Date: Jun 2022 Posts: 11 Rep Power: 3	I created this question and I am answering it because I found a way and I think this will be helpful to someone. So just open your geometry in ICEM CFD, check the Surfaces. -> Go to Create/Modify Curve under Geometry tab.-> Select the required surface-> Click on Surface Parameter present at the left bottom. Adjust the parameter to get your required curve->Apply. Then,in the left tree, right click on Parts-> Create Part->Choose the curve you created->Apply->OK. Delete other parts (curves/surfaces you don't want) and save the geometry as a .tin file. Then go to the folder where your .tin file is saved, and open the file with Notepad. In the opened file, you can go scroll down to get the points of your curve, with an extra index. Copy those datapoints and create a new file in excel and using Text import wizard, delimit at a comma and paste. Remove the last index column. Now you can save the file as a .csv file and import it in CFD post to get the required polyline.