CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Newbie questions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 30, 2000, 09:25
Default Newbie questions
  #1
Anders Olofsson
Guest
 
Posts: n/a
Hello all!

I'm a complete newbie at CFD. I'm interested in CFD in the field of aerodynamics. What I'd like to do is to calculate lift and drag for an arbitrary shaped body. (Generally it will look like an aircraft!)

So how to do this?

The body will be modelled up of polygons. Known facts are the velocity vector for the whole body, normal vectors and the area of each polygon.

I thought something like this: Calculate lift/drag for each polygon. Sum lift and drag from each polygon and use that for lift/drag for the whole body. Compare lift/drag infront and back of center of gravity to determine rotation stuff for the body.

So the important thing is how to calculate lift/drag for one polygon?. I can see that surrounding polygons affect the calculations somehow.

Some booktips on books that really teach the basics of CFD and aerodynamics would be great.
  Reply With Quote

Old   August 30, 2000, 10:37
Default Re: Newbie questions
  #2
John C. Chien
Guest
 
Posts: n/a
(1). You can check out the book section of this forum for cfd related books. (2). For aerodynamics, any standard aerodynamics book should be all right. (3). To calculate the lift and drag, you need to know the static pressure distribution on the body of the vehicle, as well as the surface shear force (viscous force). The overall contribution in the vertical direction is the lift, and the contribution in the flow direction is the drag. (4). To obtain the surface pressure and the shear stress, you will have to solve the flow field equations around the vehicle. The idea is very simple, if you know how to solve these equations. (5). If you are not interested in solving the flow field equations, then you can look for existing codes which are capable of solving these flow field equations.
  Reply With Quote

Old   August 31, 2000, 07:56
Default Re: Newbie questions - Book tip
  #3
Daniel Jaeggi
Guest
 
Posts: n/a
"Low Speed Aerodynamics" by Plotkin & Katz is an excellent text.
  Reply With Quote

Old   August 31, 2000, 09:54
Default Re: Newbie questions
  #4
Anders Olofsson
Guest
 
Posts: n/a
Ok, thanks for your answer.

Guess I've learn what flow field equations is!

I checked the book section and "Computational Fluid Dynamics : The Basics With Applications" seems to be introductionary.
  Reply With Quote

Old   August 31, 2000, 09:55
Default Re: Newbie questions - Book tip
  #5
Anders Olofsson
Guest
 
Posts: n/a
Ok. I'll go check it out!.
  Reply With Quote

Old   September 1, 2000, 10:09
Default Re: Newbie questions
  #6
clifford bradford
Guest
 
Posts: n/a
Anders, John gave youa partial answer to what i think is your question. you want to be able to calculate the lift and drag for a body assuming you already know the flowfield, right? well as John said the you only need to know the surface pressure and skin friction. the pressure is always mormal to the surface and the skin friction is always along the surface. so suppose we're dealing with a aircraft flying in your CFD model in the negative x direction and the lift force is in the z direction for each polygon the contribution of the pressure to the lift is the projection of the local pressure*the polygon area onto the positive z axis. ie: P*A*n projected onto the z axis, where P is the pressure, A is the polygon area and n is the unit normal perpendicular to the polygon (I assume you are familiar with the projection operator from vector analysis). similarly the contribution of the pressure to the drag is the projection onto the x axis. Assuming you've calculated the shear force on the surface you can do something similar to calculate its contributions to the lift and drag. calculating the shear force isn't easy though and without a book beside me I couldn't go into the details
  Reply With Quote

Old   September 1, 2000, 15:40
Default Re: Newbie questions
  #7
Anders Olofsson
Guest
 
Posts: n/a
Ah, insightful!. I sort of figured out that the polygon area and normal would be needed.

But no, I dont have the flowfield. Infact I hardly know what it is!.. I assume its some information on how the air is moving around the body?. Sort of streamlines?. I guess I'll need to calculate the airflow in order to get the pressure?

Thanks!

  Reply With Quote

Old   September 1, 2000, 17:19
Default Re: Newbie questions
  #8
clifford bradford
Guest
 
Posts: n/a
well usually your code output would have the pressure density and velocity as well as specific energy. and you can do the lift and drag calculations as a stricly postprocessing step. but many codes including the 2-D code i have do it inside the code because for the surface shear force you need the viscosity and the calculation is more involved. many codes are inviscid and so don't calculate skin friction drag so it might be easier for you to start off with an Euler or even potential flow code where the force calculations can be done totally external to the code. that way you gain experience without too much tears.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[GAMBIT] Few newbie questions ajkratos ANSYS Meshing & Geometry 5 February 28, 2011 23:26
Newbie to OpenFoam - meshing questions monti OpenFOAM 2 January 3, 2011 11:07
total newbie - Basic Questions caslor Main CFD Forum 9 December 10, 2009 12:49
Newbie Navier Stokes Questions + Grid Jigar Main CFD Forum 4 February 6, 2006 13:14
Some Newbie Questions Please Ogbeni FLUENT 1 February 3, 2005 05:08


All times are GMT -4. The time now is 02:21.