[discarded_doctrine]

Hello all,
+I put my STLs into Baram CFD (OpenFOAM GUI), then assigned my parts surface with either boundary or interface conditions.
+I assigned each part is a region (using the surface to know it's a region) for material assignment later.
+I finished castellation and to snapping this error keeps showing (see log below, error analysis section), where ho4 to ho9 are just part names, and the coordinates are inside that part region).
+It keeps showing error it couldn't find coordinate 127 83 14. I changed to 127.1 83.1 14.1, I assigned it a boundary surface, then interface, both failed and I can't know why. Can I please have some advices ? Thank you. Since this is company geometry I cannot show it here. Thank you for reading

I am using Baram v25.2.5, it uses NEXTFOAMv24 which is a fork of OpenFOAMv2406

Created cellSet ho4
Applying source regionToCell
Adding all cells of connected region containing points 1((124 231.2 14)) ...
Found location (124 231.2 14) in cell -1 on processor 7 in global region 71 out of 193 regions.
cellSet ho4 now size 4032
Created cellZoneSet ho4
Applying source setToCellZone
Adding all cells from cell set: ho4 ...
cellZoneSet ho4 now size 4032
Created cellSet ho5
Clearing cellSet
cellSet ho5 now size 0
Created cellSet ho5
Applying source regionToCell
Adding all cells of connected region containing points 1((112 250 14)) ...
Found location (112 250 14) in cell -1 on processor 15 in global region 153 out of 193 regions.
cellSet ho5 now size 6705
Created cellZoneSet ho5
Applying source setToCellZone
Adding all cells from cell set: ho5 ...
cellZoneSet ho5 now size 6705
Created cellSet ho6
Clearing cellSet
cellSet ho6 now size 0
Created cellSet ho6
Applying source regionToCell
Adding all cells of connected region containing points 1((228 250 14)) ...
Found location (228 250 14) in cell -1 on processor 5 in global region 60 out of 193 regions.
cellSet ho6 now size 3880
Created cellZoneSet ho6
Applying source setToCellZone
Adding all cells from cell set: ho6 ...
cellZoneSet ho6 now size 3880
Created cellSet ho7
Clearing cellSet
cellSet ho7 now size 0
Created cellSet ho7
Applying source regionToCell
Adding all cells of connected region containing points 1((112 124 14)) ...
Found location (112 124 14) in cell -1 on processor 10 in global region 110 out of 193 regions.
cellSet ho7 now size 7075
Created cellZoneSet ho7
Applying source setToCellZone
Adding all cells from cell set: ho7 ...
cellZoneSet ho7 now size 7075
Created cellSet ho8
Clearing cellSet
cellSet ho8 now size 0
Created cellSet ho8
Applying source regionToCell
Adding all cells of connected region containing points 1((228 124 14)) ...
Found location (228 124 14) in cell -1 on processor 2 in global region 34 out of 193 regions.
cellSet ho8 now size 3959
Created cellZoneSet ho8
Applying source setToCellZone
Adding all cells from cell set: ho8 ...
cellZoneSet ho8 now size 3959
Created cellSet ho9
Clearing cellSet
cellSet ho9 now size 0
Created cellSet ho9
Applying source regionToCell
Adding all cells of connected region containing points 1((127 83 14)) ...
[14]
[9]
[10]
[3]
[1]
[0]
[16]
[5]
[15]
[19]
[6]
[18]
[17]
[8]
[4]
[11]
[13]
[7]
[12]
[2]




















[14]
[9]
[10]
[3]
[1]
[0]
[16]
[5]
[15]
[19]
[6]
[18]
[17]
[8]
[4]
[11]
[13]
[7]
[12]
[2]




















[14]
[9]
[10]
[3]
[1]
[0]
[16]
[5]
[15]
[19]
[6]
[18]
[17]
[8]
[4]
[11]
[13]
[7]
[12]
[2]
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
--> FOAM FATAL ERROR:
(openfoam-
(openfoam-
(openfoam-
(openfoam-
(openfoam-
(openfoam-
(openfoam-
(openfoam-
(openfoam-
(openfoam-
(openfoam-
(openfoam-
(openfoam-
(openfoam-
(openfoam-
(openfoam-
(openfoam-
(openfoam-
(openfoam-
(openfoam-
2412
2412
2412
2412
2412
2412
2412
2412
job aborted:
2412
[ranks] message
2412
2412
[0] application aborted
2412
aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 0
2412
2412
[1] application aborted
2412
aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 1
2412
2412
[2] application aborted
2412
aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 2
2412
2412
[3] application aborted
)
aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 3
)
)
[4] application aborted
)
aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 4
)
)
[5] application aborted
)
aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 5
)
)
[6] application aborted
)
aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 6
)
)
[7] application aborted
)
aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 7
)
)
[8] application aborted
)
aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 8
)
)
[9] application aborted
)
aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 9
)

[10] application aborted

aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 10


[11] application aborted

aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 11


[12] application aborted

aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 12


[13] application aborted

aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 13


[14] application aborted

aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 14


[15] application aborted

aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 15


[16] application aborted

aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 16
[14]
[9]
[17] application aborted
[10]
aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 17
[3]
[1]
[18] application aborted
[0]
aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 18
[16]
[5]
[19] application aborted
[15]
aborting MPI_COMM_WORLD (comm=0x44000000), error 1, comm rank 19
[19]
[6]
---- error analysis -----
[18]
[17]
[0-19] on DESKTOP-C5T11CE
[8]
C:\Users\admin\AppData\Local\Programs\BARAM\solver s\openfoam\bin\topoSet aborted the job. abort code 1
[4]
[11]
---- error analysis -----
[13]
[7]
[12]
[2]
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)
Did not find (127 83 14) in mesh. Mesh bounds are (-10 -10 -5) (260 310 55)




















[14]
[9]
[10]
[3]
[1]
[0]
[16]
[5]
[15]
[19]
[6]
[18]
[17]
[8]
[4]
[11]
[13]
[7]
[12]
[2]




















[14]
[9]
[10]
[3]
[1]
[0]
[16]
[5]
[15]
[19]
[6]
[18]
[17]
[8]
[4]
[11]
[13]
[7]
[12]
[2]
From
From
From
From
From
From
From
From
From
From
From
From
From
From
From
From
From
From
From
From
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const
Foam::boolList Foam::regionToCell::findRegions(bool, const Foam::regionSplit&) const




















[14]
[9]
[10]
[3]
[1]
[0]
[16]
[5]
[15]
[19]
[6]
[18]
[17]
[8]
[4]
[11]
[13]
[7]
[12]
[2]
in file
in file
in file
in file
in file
in file
in file
in file
in file
in file
in file
in file
in file
in file
in file
in file
in file
in file
in file
in file
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
topoSet/cellSources/regionToCell/regionToCell.C
at line
at line
at line
at line
at line
at line
at line
at line
at line
at line
at line
at line
at line
at line
at line
at line
at line
at line
at line
at line
131
131
131
131
131
131
131
131
131
131
131
131
131
131
131
131
131
131
131
131
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.




















[14]
[9]
[10]
[3]
[1]
[0]
[16]
[5]
[15]
[19]
[6]
[18]
[17]
[8]
[4]
[11]
[13]
[7]
[12]
[2]

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting

FOAM parallel run exiting
[14]
[9]
[10]
[3]
[1]
[0]
[16]
[5]
[15]
[19]
[6]
[18]
[17]
[8]
[4]
[11]
[13]
[7]
[12]
[2]

[discarded_doctrine]

Well I found it, in region creating step 2, if you move your green boundary then retarget the object, which is very to make this mistake, your coordinates will all be messed up. If you accidentally moved it, go to 1. geometry, unlock, then next, then new region just to reset the green boundary.