CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

turbulent flow using PHOENICS

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 10, 1998, 12:17
Default turbulent flow using PHOENICS
  #1
Abdul Hafid
Guest
 
Posts: n/a
Hi every body

I want to simulate a turbulent flow around axisymmetric body. Any one knows how to simulate the turbulent flow using PHOENICS
  Reply With Quote

Old   October 14, 1998, 10:11
Default Re: turbulent flow using PHOENICS
  #2
Rasputin
Guest
 
Posts: n/a
errrr, RTFM?
  Reply With Quote

Old   October 14, 1998, 11:39
Default Re: turbulent flow using PHOENICS
  #3
Dawei Sun
Guest
 
Posts: n/a
I have used PHOENICS to simulate turbulent flow. BUt I really don't know what kind of thing you want to do. Develop your own model? Do you need to generate the grid?
  Reply With Quote

Old   October 15, 1998, 06:44
Default Re: turbulent flow using PHOENICS
  #4
Abdul Hafid
Guest
 
Posts: n/a
Hi Dawei Sun

Thank you for your response. I want to use PHOENICS shareware ver 1.5 I've downloaded from the internet. I don't know how to use Q1 file to write the turbulant part. any examples or library cases that can help?.
  Reply With Quote

Old   October 16, 1998, 10:24
Default Re: turbulent flow using PHOENICS
  #5
Abdul Aziz Jaafar
Guest
 
Posts: n/a
Dear Abdul Hafid

Perhaps the best example to model the axisymmetric flow by chossing the library case on pipe flow. You can also look at any library case with turbulent flow. I think the good start to select turbulent flow with mixing length turbulence model. and you can compare the result with laminar flow

A. Aziz Jaafar
  Reply With Quote

Old   November 3, 1998, 12:25
Default Re: turbulent flow using PHOENICS
  #6
Vijay Thaker
Guest
 
Posts: n/a
If your using ver 1.5 share ware u might able to use the beginners manu to create your model step by step. Just access your sattelite ang type :

load(menu) then press enter the menu will guide u step by step.

Thanks.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
spectrum: LES of a turbulent channel flow finally goes to turbulent liu OpenFOAM Running, Solving & CFD 6 November 1, 2011 02:00
Difference between recirculation zone and turbulent flow region ashtonJ Main CFD Forum 0 September 16, 2011 04:46
Patch a bubble inside turbulent flow Helmi FLUENT 0 February 4, 2011 05:54
Turbulent flow through hexagonal circular pipe yogesh@cfd Main CFD Forum 0 November 10, 2010 00:10
modelling laminar and turbulent flow in the same Ol FLUENT 2 November 25, 2005 03:52


All times are GMT -4. The time now is 00:42.