CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Issue 4 of adapco-online

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 21, 2000, 14:42
Default Issue 4 of adapco-online
  #1
Sreenadh Jonnavithula
Guest
 
Posts: n/a
The editors of adapco-online wish you all a happy holiday, and a happy New Year 2001.

It is our pleasure to present the fourth issue of adapco-online. Please visit us at http://www.adapco-online.com

The second article in the Understanding STAR-CD series deals with transient flows. The Dr.Post series continues with an article on creating icons in plots. We also have several other articles, on radiation, user subroutines etc., and a bunch of user articles.

This issue also has several presentations from the recently concluded European users conference. We hope you will enjoy and benefit from the works of your collegues.

On the editorial side, we have a new cumulative index which should make finding older articles easier, and a selection of user comments ..

As usual, we'd like to reiterate that we are offering to PAY STAR-CD users to contribute to adapco-online. We will pay $300. for each accepted user article. Please do consider sharing your non-proprietary work with other users in the STAR-CD community.

Please send us your feedback, good or bad, about adapco-online!
  Reply With Quote

Old   December 21, 2000, 19:16
Default you'll get stuck
  #2
DONT GO THERE!!!!!
Guest
 
Posts: n/a
Nice, web page... Not only could I see only half your web page, I couldn't get back...YOU TRAPPED ME THERE. For that reason alone I will not read anything on your site...merry x-mas...
  Reply With Quote

Old   December 22, 2000, 00:08
Default SPAM IMHO
  #3
George Bergantz
Guest
 
Posts: n/a
I submit this is SPAM. This belongs on the STAR page.
  Reply With Quote

Old   December 22, 2000, 10:41
Default Re: you'll get stuck
  #4
Sreenadh Jonnavithula
Guest
 
Posts: n/a
This is the first time I heard this complaint, and believe me, it is certainly not intentional. I simply cannot reproduce it myself - I'm using netscape 4.7, with screen resolution set to 1200 wide, maximised screen. Note that adapco-online uses frames, so you have to hit the BACK button twice to get back to your previous page; If there is some other error/version dependance in the scripts, I would appreciate it if you can be more specific about the problem.

And yes, a happy holiday to you too!
  Reply With Quote

Old   December 22, 2000, 17:48
Default Re: you'll get stuck
  #5
Jonas Larsson
Guest
 
Posts: n/a
This affects all more recent versions of netscape, including 4.7. Your site automatically forwards people from http://www.adapco-online.com/ to http://www.adapco-online.com/frontpage.html, then when they hit back from the frontpage.html page and return to the first page they are again automatically forwarded to the frontpage.html page - a well known trick to capture people and keep them from "backing away" from your site. It is a bad habit which I donīt like at all.
  Reply With Quote

Old   December 23, 2000, 00:22
Default Re: you'll get stuck
  #6
Sreenadh Jonnavithula
Guest
 
Posts: n/a
Yes, I see the problem now; however, it is an unintended consequence (a bug!?) of some processing I needed to do (to check browser compatibility, and forward them to the site only if some minimal capability is available), rather than some devious plot to keep visitors on adapco-online. You can always go back by holding down the mouse button on the BACK key, which will bring up a drop down menu of your previous stops, and picking the site you want to go to. When I get back from vacation in the first week of Jan, I will fix this so that the BACK key works in the usual manner. Thanks for your patience ..
  Reply With Quote

Old   December 23, 2000, 14:32
Default Re: you'll get stuck, really bad
  #7
John C. Chien
Guest
 
Posts: n/a
(1). It is not just a problem with Netscape, it is also a problem when using Microsoft Internet Explorer. (2). It is really bad for the readers of this forum. (3). I think, there are at least two very bad conditions which exist in CFD industries. The first one is related to the vendors' webpages. Sometimes, the information given in the forum answer will let you believe that it is free. But as you visit the location, you will have to purchase the items in order to read the article. Another problem is like the location lockup, then it interrupts the reader's activities. This will force the reader to start all over again. It is not fair in both cases, because the readers were interested in the forum in the first place. They should not be treated this way. (4). Then the answers to this problem comes in the delayed action, such as, it will be corrected in the future,.... And at the same time, the bad message is still there, and more and more readers are suffering. (5). The other problem is a much bigger one, that is, when a commercial code can not meet the needs of the reader (user), the reader post a message here at the forum. Then there are exchange of messages from other readers, trying to find an answer to the question. But in many cases, it is related to the limitations of the code, and then the voice from the vendor will announce that a better version will be released in the next or future versions. (6). This type of answers is really very bad. "WHO IS GOING TO VISIT THE SAME WEBSITE AGAIN, IF IT IS NOT USER-FRIENDLY ? IF IT CREATE TROUBLES FOR THE READERS ?" Action should be taken to prevent further damage to other readers of this forum. (7). As for the statement of the next generation codes, I think, the readers from this forum have accumulated enough knowledge about the limitations or bad part of each commercial CFD codes listed here. And a section of problem listing should be created, so that other potential new users can use it as a reference to guide them in the selection of the particular code for his particular application. This is really very important, because readers come here to seek information and answers, they are not here to "REPEAT THE SAME MISTAKES". (8). So, we should have a section where information such as: item-1, code-a is not user-friendly in turbomachinery mesh generation. item-2, website-c will lead you to a dead end street.... (9). If the code is not capable of doing something, we like to make it known right now, so that more readers can spend their time wisely instead of repeating the same mistake, over and over again. When you see a man-hole not covered, you put up a sign there. That is the minimum one must do here in the forum. (if the code is not working right now, there is a chance that it is not going to work in the future version as well.)
  Reply With Quote

Old   December 24, 2000, 05:49
Default Re: you'll get stuck
  #8
Jonas Larsson
Guest
 
Posts: n/a
Sounds good. I see why you do this. However, if you just make the index-page dynamic and display a different version of it depending on browser-capabilities you will avoid this auto-forwarding.

I'm sorry if I implied that the "capturing" was intentional. The auto-forwarding is especially irritating for people who read discussion forums - they often just want to check out the site and then hit the back-key to return to the forum and continue reading other messages.
  Reply With Quote

Old   January 5, 2001, 14:40
Default Re: you'll get stuck
  #9
Meulard
Guest
 
Posts: n/a
Hello,

On the right of the location back in Netscape you have a small arrow giving you access to the history and you can go back to cfd-onine.com

On top of the Window, select Communicator>Tools>History, then you can get back to the page you were.

When clicking on the same button for a long time you will obviously trapped yourself...D'Oh!

Meulard Simpson
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Meshing related issue in Flow EFD appu FloEFD, FloWorks & FloTHERM 1 May 22, 2011 09:27
CFD Online Running on a New Server CFD Online Team Main CFD Forum 2 November 30, 2007 17:58
CFD Online Down due to Hardware Failure CFD Online Team Main CFD Forum 2 November 19, 2007 06:06
Milovan Peric joins CD adapco Group CD adapco Group Marketing Siemens 2 July 12, 2001 17:20
CD adapco Group Website Computational Dynamics Siemens 1 June 1, 2001 00:35


All times are GMT -4. The time now is 05:32.