CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Remeshing Algorithms

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 11, 2001, 09:36
Default Remeshing Algorithms
  #1
Apurva Shukla
Guest
 
Posts: n/a
I am looking for algorithms in which I change the grid completely for each time-step or after some particular time step. Are their any refrences available which give the interpolation techniques for assigning the values to new cells based on solution from previous time step. I hope I am clear in explaining my problem.

Thanks

Apurva
  Reply With Quote

Old   January 14, 2001, 05:16
Default Re: Remeshing Algorithms
  #2
John C. Chien
Guest
 
Posts: n/a
(1). You need to take a look at the "Adaptive Meshing". (2). In Joe Thompson's book "Numerical Grid Generation", there is a chapter XI on "Adaptive Grids".
  Reply With Quote

Old   January 18, 2001, 01:41
Default Re: Remeshing Algorithms
  #3
A. Rajani Kumar
Guest
 
Posts: n/a
How you are going to change the grid. 1)Is it is based on gradients of the flow charecterstics then u refer adaptive grid generation. 2)if you are changing the grid size it self which is comman in the case of Multigrid methods then refer MG net. 3)If it a moving grid i mean with grid is depend on time then you have to see fluid dynamics and geat tranfer of turbomachinary by Lakshminarayana, Budugur

But unless u clearly tell how your grid is a changing with time, it is very difficulat for any body to gine exact answer.
  Reply With Quote

Old   January 18, 2001, 02:48
Default Re: Remeshing Algorithms
  #4
Apurva Shukla
Guest
 
Posts: n/a
There are two information I am looking for :

1. First change in grid due to gradiant adaptation, preferably remesh the whole domain.

2. Remeshing as in cases of moving valves of IC engines, where mesh changes in every time step and you have to get the values at new cells for next time step.

As far as moving grid are concerned I have already worked on 3-D structured Euler solvers for multistage turbomachine, so I have no doubt regarding it.

Thanks for your help

Regards Apurva
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Remeshing with User Defined Options ChristianF CFX 2 September 24, 2014 10:19
Bugg in Remeshing in 3D - Any Fluent Wizards ?? Amr FLUENT 1 November 1, 2011 05:04
FSI with remeshing omidiut CFX 3 September 12, 2011 18:01
Dynamic mesh (local remeshing) I'm stuck Mike FLUENT 2 February 26, 2006 15:00
Dynamic Grid Remeshing causing Divergence? Andrew Wick FLUENT 0 January 23, 2006 19:39


All times are GMT -4. The time now is 08:08.