CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

are you having code?

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 19, 2001, 12:27
Default are you having code?
  #1
Jaggarao
Guest
 
Posts: n/a
Hai?

any body are having code of the following problem?

problem: Using Newtons method, solve study two-dimensional Burgers's equations

u du/dx+v du/dy-(1/10)(d^2/dx^2+d^2/dy^2)u=0

u dv/dx+v dv/dy-(1/10)(d^2/dx^2+d^2/dy^2)v=0

where d= partial derivative.

for the velocity components "u" and "v" in the rectangular domain (-1,0)X (1,pi/30).The boundary conditions from the analytic solution

u= -(1/5k)(dk/dx)

d=partial derivative.

v=-(1/5k)(dk/dy) where

k= 110.13+110.13x+ ( e^{5(x-1)}+e^{-5(x-1)})cos(5y)

  Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
The FOAM Documentation Project - SHUT-DOWN holger_marschall OpenFOAM 242 March 7, 2013 12:30
How to make code run in parallel? cwang5 OpenFOAM Programming & Development 1 May 30, 2011 04:47
Open Source Vs Commercial Software MechE OpenFOAM 28 May 16, 2011 11:02
Small 3-D code Zdravko Stojanovic Main CFD Forum 2 July 19, 2010 10:11
public CFD Code development Heinz Wilkening Main CFD Forum 38 March 5, 1999 11:44


All times are GMT -4. The time now is 11:00.