 |
 |
 |
|
|
|
[Sponsors] | ||||
March 31, 2001, 18:42
|
Far field Boundary condition
|
#1 |
|
Guest
Posts: n/a
|
Dear all,
I am wondering if there is a best way to implement boundary conditions at the far field(say, the far field is not far enough, there may be a oblique shock across the far field.) Thanks. Ma |
|
|
||
|
April 1, 2001, 08:40
|
Re: Far field Boundary condition
|
#2 |
|
Guest
Posts: n/a
|
The far field has to far enough in order to have no influence on your computations. The far field is supposed to be a free exit. If you have an obliqe shock near the boundary, then move it away.
|
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem with rhoSimpleFoam | matteo_gautero | OpenFOAM Running, Solving & CFD | 0 | February 28, 2008 06:51 |
| [Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |
| Convective Heat Transfer - Heat Exchanger | Mark | CFX | 6 | November 15, 2004 15:55 |
| New topic on same subject - Flow around race car | Tudor Miron | CFX | 15 | April 2, 2004 06:18 |
| Pressure Boundary Condition | Matt Umbel | Main CFD Forum | 0 | January 11, 2002 10:06 |
Linear Mode
