CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

FLUENT Boundary condition problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 26, 1998, 19:07
Default FLUENT Boundary condition problem
  #1
Khalid
Guest
 
Posts: n/a
Hi I really got some problem, my simulation about extinguishing a compartment gas fire with water spray droplets. the difficulties I met about swithcing on some of the model togethre in FLUENT. The models are time dependent, Dispersed phase (water spray droplets, radiation model with a combustion (high temperature around 2000K). I need to use radiation model to ge accurat result to compare it with experimental results. but To avoid making the problem complex. I thought to use wall heat flux instead of radiation. In otherwords calculating how much the radiation loss (30%) of the total heat release rate 4.6 MW which will results in 1.38 MW, and then use heat loss through the wall equivalent to this value. So, I need feedback about this and any other comments or any other solution to this problems
  Reply With Quote

Old   December 2, 1998, 20:54
Default Re: FLUENT Boundary condition problem
  #2
Sung-Eun Kim
Guest
 
Posts: n/a
Dear client,

Could you please contact me at sek@fluent.com ?

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 02:13
UDS problem with wall boundary condition Alex F. FLUENT 15 September 21, 2015 10:28
(Heattransfer) Temperature boundary condition problem suitup OpenFOAM Bugs 15 October 14, 2010 23:18
vorticity boundary condition bearcharge Main CFD Forum 0 May 14, 2010 12:32
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05


All times are GMT -4. The time now is 05:35.