profile for fully developed turbulent duct flow

November 14, 2001, 12:53

I am doing numerical simulation for 3-D turbulent flow. The inlet boundary is the 3-D fully developed turbulent (rectangular) duct flow. But I cannot find the equations for the velocity profile at different Reynolds numbers, say Re = 5000, 6000 etc. Could you recommend some references or aavailable equations? Thanks a lot.

November 14, 2001, 21:35

You might find DNS results for similar cases at : http://imhefwww.epfl.ch/lmf/ERCOFTAC/

good luck

November 14, 2001, 12:53	profile for fully developed turbulent duct flow	#1
jeff Guest Posts: n/a	I am doing numerical simulation for 3-D turbulent flow. The inlet boundary is the 3-D fully developed turbulent (rectangular) duct flow. But I cannot find the equations for the velocity profile at different Reynolds numbers, say Re = 5000, 6000 etc. Could you recommend some references or aavailable equations? Thanks a lot.

November 14, 2001, 21:35	Re: profile for fully developed turbulent duct flo	#2
sebperron Guest Posts: n/a	You might find DNS results for similar cases at : http://imhefwww.epfl.ch/lmf/ERCOFTAC/ good luck

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fully developed temperature profile for square cross section duct at outlet	balkri	Main CFD Forum	0	October 5, 2009 11:06
BC for fully developed turbulent flow in a pipe	mmd014	FLUENT	2	May 22, 2009 06:50
Natural convection - Inlet boundary condition	max91	CFX	1	July 29, 2008 20:28
LES: fully developed flow at the inlet of a duct	cfd novice	CFX	6	June 14, 2008 12:59